hardwood floor

How To Repair Hardwood Floor Water Damage

Nowadays, most homeowners are turning to the classic and elegant look of hardwood floors. However, its only weakness is that even a small amount of clean water is enough to deal with a lot of damage. Are you one of those who have been experiencing wood floor water damage? By reading this full article, we will walk you through how to repair your water damaged wood floor.

What are the causes of hardwood floor water damage?

  1. When the temperature goes down, humidity increases. If this happens, moisture content increases and can cause your flooring to have issues. Thus, humidity has a role in damaging the wood flooring.
  2. Broken pipes or leaks cause water damage to your wood floors.
  3. Groundwater occurs when floodwater seeps into the foundation of your home.

What are the Signs of Water Damaged Wood Floors?

  • Water Stains/discoloration- stains can be dark or light and usually in the shape of uneven rings that ripples from the water source across your wood floor.
  • Buckling- this is when the floor planks are being detached from the subfloor. Excess moisture causes the floorboard to expand and can make a large hump on your floor.
  • Cupping- this happens when the edges of each board bend upward and warp out of shape. Moreover, it also makes the gaps expand between floorboards.
  • Bulging- another wood floor issue is when it bubbles outward forming a “crown-shape” on the woods. It means that more moisture is on top of the plank than the bottom part.

How do you Repair Water Damaged Wood Floor?

When dealing with water-damaged flooring, you have to respond right away to avoid more serious damage. Follow the following steps to fix a water-damaged hardwood floor.

1. Find first the root cause of water-damaged wood floors then fix the source of the problem. Issues such as leaks, overflow, water spills, or moisture level imbalance can be some of the causes of the damage. For instance, if there’s a leaky pipe, try to resolve it first as this could lead to a bigger issue. You can start the repair process once it’s repaired.

2. Get rid of excess amount of water or moisture by drying out the affected areas or parts. Consider using a wet/dry shop vacuum for efficient removal of excessive water especially if it has absorbed water deeply into the wood. You can also use mops and old towels for wiping away any excess moisture or water.

3. Treat the moldy areas of the wooden floors and check the subfloors for any signs of mold growth such as musty stains especially musty smells. You can use either natural or chemical mold killer.

4. Ventilate and completely dry the floor immediately using fans. If the humidity level is low, open all windows and doors for proper circulation of air. You can also use dehumidifiers to get rid of moisture in the room.

Warped Hardwood Floor: Repair or Replace?

For slightly warped boards, you can fix it by simply using fine-grit sandpaper to sand it down. Once the moisture on the floor has been removed, you can start sanding down the boards carefully. Placing a heavy object (e.g. furniture or dresser) on top of the wood boards can also be helpful in fixing warped hardwood floors.

However, if you start to notice buckling of your hardwood floor, you may need to remove the affected planks and replace them. For serious damage, it may be necessary to replace the damaged boards.

Seek Trusted Professionals

Wood floor water damage can really be stressful if you ignore it. If you think your home has it, check out the steps above. You can fix the problem on your own especially for minor cases of water damage. But it is still best to seek help from a licensed water damage restoration company like Superior Restoration.

Water Damage Murrieta provides excellent restoration services, a restoration company you can trust. They can restore your water-damaged hardwood floor and help you address any sources of water damage. This is to prevent extensive damage to your existing flooring.

Have a hard time with your water damaged solid hardwood floor? Please contact us today. We are available 24 hours a day, 7 days a week because we care.

Cleaning a mattress with a Vacuum

Tips To Save and Dry Your Water Damaged Mattress

When water damage hits your property be it from floodwaters or piping leakages, it doesn’t spare anything. Unfortunately, that includes your mattress! The same thing with the other household items, mattresses can also be damaged by contaminated water. Restoring it becomes quite hard especially if the mattress has been soaked for more than 24 hours. In this case, consider discarding it. However, in some conditions, saving a soaked mattress might be possible. In this article, we will go through with some helpful tips on how to dry and restore a wet mattress.

Remember!

Just like your carpets and rugs, mattresses are home to many allergens, too. They provide a good place for mold and mildew to grow especially within 24 hours to 48 hours of water exposure.

So before getting into the whole repair and restoration process, try to assess first the extent of the damage. Determine whether your wet mattress is worth the effort and money that will be spent in the process. Or will it be able to accomplish the restoration task or not?

If you have a mattress that is of low quality and common, it is better to just dispose of it and buy a new one. But if your memory foam mattress is way expensive and has a sentimental value, you must go for whatever it takes to recover it from the damage.

And to help you restore the mattress, better consult with professional restoration.

How to Completely Dry a Mattress

Reconditioning and cleaning a mattress at home is extremely difficult and sometimes hard to restore. Check the following steps in trying to salvage your mattress at home:

  1. Treat the mattress right away or within 24 hours to prevent mold growth.
  2. You may want to rent a wet-dry vacuum to use on your mattress. This will help in absorbing excess liquid.
  3. Dry your wet mattress thoroughly. If the weather is fine, dry your mattress outdoors especially in direct sunlight for a few hours. You may use fans, too. This will speed up the process. You may also open windows for better air circulation.
  4. Try adding baking soda to cover your mattress before vacuuming it. This cleaning solution is effective and helps in absorbing excess moisture. Moreover, it gets rid of the musty smell and prevents mold growth.
  5. Brush off any surface soil and debris or use a nozzle vacuum cleaner. The purpose of this type of vacuum is for picking up as many different kinds of dust as possible.
  6. For dirt/water stains: use a cleaning solution such as water and a part of dish soap or any gentle cleanser.
  7. For mold stains: dip a clean cloth in an alcohol solution. (1cup alcohol:1 cup water) for mold prevention. You can also use hydrogen peroxide, white vinegar, or bleach.
  8. Wring out the cloth and wipe the mattress gently.
  9. Dry using a fan for a rapid drying process.

Box Springs

If upholstered box springs and wood frames are slightly damaged, thoroughly dry them first before replacing the mattress cover and pad. However, consider buying new boxsprings if the old ones are severely damaged.

Call Superior Restoration, Today!

Though DIY basic tips for repairing your water damaged mattress are given, it is still preferable to contact a water damage restoration company. We have teams of highly-skilled experts that can help you get your mattress completely dry!

We are always open to serving you 24/7. Call us today, Water Damage Murrieta to know more about our water damage, mold, and fire restoration services.

dishwasher leak

Why Is My Dishwasher Flooding? Causes And Tips Worth-Knowing

Just like washing machines, dishwashers make a person’s life easier. However, when you discover standing water at the bottom of the dishwasher, it becomes a burden. And if not taken care of immediately, it may lead to water damage. Dishwasher flooding is one of the most common reasons for home insurance claims.

The good thing is you need not call a repair technician right away once you experience dishwasher leaks. Since there are DIY solutions that you can do for the most common culprits of this issue. And to prevent further damage, consider consulting a water damage restoration professional.

Why is my dishwasher flooding? Keep reading to discover the common causes and how to prevent your dishwasher from leaks and flooding.

Why is your dishwasher flooding? Check out the common causes.

Unluckily, there are various reasons why your dishwasher leaks, floods, or overflows. People think small leaks through the door are not that dangerous but a dishwasher leak from the bottom can do more. It can flood your kitchen or spread to other rooms in your home. Learn the following causes and prevention to save you from serious damages.

Worn-out Seals and a Faulty Dishwasher Door Gasket

Older units of dishwashers may develop leaks due to dents, corrosion, worn-out gaskets, and seals. Over time, the latch and hinges tend to loosen which also contributes to not forming a good seal of the door.

Loose Connections, Hoses, and Valves

Hoses and connections inside the dishwasher can work loose over time. This can cause dishwasher leaks or even flood your kitchen. Make sure that you check the hoses of your dishwasher drain to see if everything is securely connected. Include the clamps that hold the hose in place on both sides.

Also, check your water inlet valve. If the valve malfunctions, it can fill the dishwasher with water especially when not in use. As a result, overflowing and flooding onto the floor will occur. Cracked hoses or any fault found with the valve, need to be replaced.

Dishwasher Detergent Issues

Certain dishwasher soap is specially formulated and intended only for dishwashers. Avoid using regular dish soaps since they make thick foam and lead to excessive suds. Even if rinsing is done before running the dishwasher, the solution can still create bubbles and put pressure against the door seal. This will eventually cause leaks and dishwasher overflow.

Clogged Drain Issue 

The bottom of your dishwasher can become clogged with food debris. These particles can block the area where the water cannot drain properly out of the dishwasher. This will lead to floods and overflow.

Float Valve/Assembly Issues

The float assembly is found inside the dishwasher tub located on the bottom. The float assembly moves upward when water enters your dishwasher then sends signals to the dishwasher valve to shut the water off. The float wears out over time and if it is stuck in the UP position, the dishwasher may overfill. This may lead to kitchen flooding.

Dishwasher Flooding: What to Do & How to Prevent It

When your unit’s leak is severe and it floods, you usually panic. Just calm down. Turn off the power to the dishwasher or shut off the circuit breaker before cleaning up. Then, mop or soak up the water with towels or you can also use a handy siphon pump.

Check your dishwasher’s drain and the drain grate or mesh that covers the drain area as well. Sometimes you can find food particles caught in the grate. Remove and clean them thoroughly with warm water and soap.

Once cleaned, check if it drains properly. If not, the hose running from the unit to the kitchen sink may need a repair or replacement. If ever your dishwasher leaks again in the future, call a plumber to examine the unit carefully.

Another important thing to check is the garbage disposal and kitchen sink for clogs, especially if the pump is clear. Since dishwashers typically drain into these areas, a clog or blockage will prevent the unit from emptying fully. This will lead to backflow, instead.

Prevention Tips for Dishwasher Flooding

After doing DIY solutions on fixing your dishwasher issues, you can now check the following tips to prevent dishwasher flooding.

  • Load your dishwasher properly so as not to block the sprayers.
  • Use the appropriate kind and amount of soap for your dishwasher.
  • Always clear out the dishwasher’s bottom after use to prevent blockages. Check for broken glasses or plates since they can also block the bottom of the dishwasher.
  • Clean the dishwasher often. Keep the filter clean as well as the seal, gasket, and sprayer nozzles at least every three months.
  • Check both the float assembly and the switch where it is connected. They may get stuck or fail which can lead to dishwasher leaks.
  • Check the drain hose and the supply line every six months.
  • Only run your dishwasher if you’re at home so you can monitor its performance.
  •  Keep an eye on your dishwasher’s water level.
  • Run water at the sink before beginning the wash cycle to optimize the cleaning performance.

Seek Help From Your Trusted Water Damage Restoration Company

Dishwasher flooding is one of the common problems of most homeowners. Ignoring even small leaks can lead to a disastrous situation. Prevent it from happening by following the tips mentioned above and calling a professional.

Superior Restoration is proud to serve as one of the leading companies for water, mold, fire, and smoke damage restoration services. We are ready to serve our residential and commercial clients 24/7. Please don’t hesitate to contact Water Damage Murrieta.

closet

10 Helpful Tips On How To Prevent Mold In Closet

Mold is a common foe and continues to be a persistent issue of every homeowner. Unfortunately, it appears not only in your bathroom or basement but in your closet as well. Mold can affect the clothes in your closet and damage them.

Mold in small amounts is not that harmful but mold spores can easily reproduce and take over your closet. Check out the following tips on how to prevent mold in the closet to prevent significant property damage.

Signs of Mold in Closet

Custom closets provide a good environment for mold to easily develop since they are dark and enclosed. Moisture from the air and damp clothes can affect your closet and make the mold spread quickly.

If you notice any of the following symptoms, act and prevent mold in the closet right away. It’s also best to consult professional mold removal especially if mold has spread to other parts of your home.

  • An unpleasant or musty odor or smell can spread throughout your property.
  • Unpleasant stains of different colors that you can see on the walls of your closet.
  • Excessive moisture that is trapped underneath the wall’s surfaces causes paint to peel, crack, or bubble.

How to Prevent Mold in a Closet

With poor airflow, mold can be persistent in reproducing even in your closets. Getting rid of mold completely is not easy, but the Environmental Protection Agency recommends ways to prevent indoor mold. And one of the best ways you can do is to “control moisture.”

Consider the following important tips to prevent mold from growing in your closets and further damage in surrounding areas:

1. Once you begin to smell something musty in your closet or on your clothes, never ignore it.  

It’s a sign that you might have mold issues and don’t attempt to cover it with an air freshener.

2. Check your closets for water damage. 

Check water leaks particularly on the ceiling and walls. If moisture isn’t checked, it will damage your closet space.

3. Keep your closets including the items inside, clean and dry.

Make sure that your clothes or anything that you put inside your closet are clean and dry. Regularly clean your closets to prevent mold. When cleaning, remove everything in your closet so you can vacuum or wipe the dust and dirt completely.

Dry everything before putting them back. You can sometimes leave the door of your closet open for several hours to allow fresh air into the space. You can also place silica gel, washed charcoal, or baking soda in your closet since they can absorb moisture.

4. Space out your clothing for better circulation.

Allow extra space by not packing your clothes too tight together and removing things you no longer use or want. Rearranging your clean clothing for more space allows the air to circulate better.

5. Dispose of plastic bags.

Avoid storing your clothes in dry-cleaning bags or plastic. Plastic, usually with polyethylene composition can trap humidity and cause mold to grow and develop.

6. Maintain low levels of humidity.

Keep humidity in low levels like between 30 % to 50 %. Using a dehumidifier is so useful in removing excess moisture from your closets. Moreover, leaving the closet doors open for several hours can help in preventing mold in the future.

7. Always hang your clothes.

Avoid storing anything on your closet floors to prevent moisture from being trapped beneath.

8. Install a  light bulb in your closet.

This will help in burning off excess moisture and humidity in your closet. Just be sure that clothes or other flammable items are far from the light.

9. Consider replacing your old wooden closets with wire shelving.

Lack of airflow is one of the major causes for mold growth aside from humidity. Heavy shelving made from wood absorbs moisture which will cause mold on wood.

If you have wooden closet shelves with wire structures, the grid-like design allows better ventilation. Even between your hung-up clothes and folded clothes, the wire shelves often have openings along the bottom for superior circulation.

10. Spray vinegar to kill mold in your closet.

Fill a bottle with white vinegar and spray it on all surfaces of your custom closets. Spray it on the walls, clothing rods, and cabinets. Then, allow and leave the vinegar to dry. Do this method before you place all your clothes or items back in your closet.

Dealing With Mold in Your Closet 

Mold growing in your closet is annoying since it can even hide in the best-kept closets or cabinets. So if you’re still struggling with persistent mold, consider contacting our team at Superior Restoration. We have highly-trained technicians and advanced equipment that can deal with your mold issues more efficiently.

Please contact our local office Water Damage Murrieta, for mold remediation and water damage repair. We are available 24 hours a day, 7 days a week to serve you better.

damaged ceiling

Learn 10 Steps On How To Repair Water Damaged Ceiling

Water leaking from the ceiling is a common problem that you shouldn’t ignore. Once you discover drops of water coming through the ceiling, act immediately. Because if left untreated, ceiling water damage can lead not only to structural damage to your home but can also endanger your health.

Taking care of water damage as soon as it happens will prevent bigger issues in the future. Mold remediation experts at Superior Restoration will give some insights on how to repair the water damaged ceiling.

Is Water Damage Dangerous?

Yes. Water damage is not safe, be it a water stain in your ceiling or anywhere else, it can pose a threat to you and your property. Check the following number of different reasons why water damage is dangerous.

  • It could end up with mold in your home. There are different types of mold but all produce spores that could be mixed in the air and can have an impact on your health.
  • It can weaken the structural integrity of your property. If it gets into the ceiling, it can make the ceiling weaker and could cause it to collapse.

Signs of a Water Damaged Ceiling

Be it a water damaged wall or water damaged ceiling, you should learn how to identify water damage before it becomes a more serious problem. Check the following:

  • Discoloration
  • Standing or Pooling Water
  • Rusty Metal
  • Mold Growth/ Musty Smell

Before You Start Any Repairs or Cleanup

For your safety, shut off the power supply if the water is running close to any electrical wiring to avoid electric shock. Be extra careful when standing under a ceiling because it might cave in on you if it is holding too much water. It’s best to inspect the ceiling first before you enter the room to see if there are any watermarks/stains, discoloration, or a bulging ceiling.

How to Repair Water Damaged Ceiling

Check out these steps on how to repair a water damaged ceiling.

Step 1: Assess the damage and find out the extent of it.

Step 2: Try to reduce the amount of water trapped inside the ceiling. You can do this by gently poking small holes through the ceiling using a nail, ice pick, screwdriver, or knife will also do. Be careful when doing this to avoid water rushing all out and flooding the room. Also, make sure to place a bucket underneath the hole you’re making for water drip collection.

Step 3: Check the water source and the affected areas.

Once you identify the source of the water leak, fix it. If water damage is due to a leaking roof, repair the roof right away (if the weather is fine). You can fix this or remove the damaged ceiling on your own but simply call a professional for roof repair.

If it is not possible yet to seal the roof due to bad weather, cover it with a canvas or any water-proof sheeting to stop water from coming in through the hole.

Stop the supply of water if the cause is a burst pipe and call a professional plumber to help you fix the pipe.

Step 4:  Before you proceed with cleanup, spread a tarp over the furniture and the floor for protection. Get rid of all wet ceiling material such as the insulation and sheetrock. Remove all loose and peeling drywall or plaster. Dry out the ceiling as fast as you can to prevent mold and reduce damage.

You can use high-volume fans and dehumidifiers for quick drying of the ceiling and other ceiling materials like wood joists. Salvageable materials should be dried, too.

Step 5: Prepare an anti-mold solution and spray the water-damaged area.

Step 6: For minor ceiling water damage, you can use plaster or drywall mud to fix small gaps and cracks. And you can fill the small holes with joint compounds.

For gaps that are less than half an inch wide, use a putty knife or utility knife to fill the gaps and leave a smooth finish. For gaps that are wider, fill them in first and then sand them smooth.

Step 7: For major ceiling water damage, sections of the ceiling should be cut away. You can use a box cutter or a saw that is intended for drywall and make straight cuts.

Step 8: Cut a new piece of drywall. It should be smaller than the hole and then screw it into the ceiling joists. To seal the gaps, mud, and tape the joints, and smooth out the ceiling.

Step 9: For plaster, replace the backing material or the lathe then apply the plaster in thin layers. Allow it to dry and continue to apply layers until the existing texture matches the new section.

Step 10: Paint the damaged part with a sealing primer once the plaster or mud is dry. But before applying the topcoat, it is necessary to try at least two coats of primer.

Professional Water Damage Restoration Services

You don’t know when leaks will happen, you don’t even know when water damage has started. But there is one thing that you can be sure of—the skilled professionals at Superior Restoration will be there for you especially in emergency situations.

We have advanced tools and equipment to make your home dry and safe again. Please contact Water Damage Murrieta, we specialize in water damage remediation and emergency water extraction services. You can rely on us 24/7/365.

mold on walls

Mold DIY Tips: How to Get Rid of Black Mold on Ceiling

Musty smells begin to invade your home. You notice black spots that are uneven in distribution on the ceiling. So you find out the culprit——most likely the result of black mold growth! This happens because of the condensation behind the drywall or water leaks joined with the absence of air movement in your home. Black mold releases spores that can cause serious health issues especially to vulnerable people. To prevent black mold from growing on your ceilings and avoid expensive home improvement repairs, check the tips below on how to get rid of black mold on the ceiling.

What is Black Mold?

It is widely known as Stachybotrys Chartarum, a specific type of toxic fungus that is mostly found indoors. It releases mold spores that appear as black or dark green and can spread quickly in your home. If your property has excessive moisture, black mold will start to grow and digest whatever nutrients are present in order to survive.

Is Black Mold Dangerous?

Mold can be dangerous for people in confined spaces. The threat comes from mold spores. They are naked to the eye and easy to inhale. Constant exposure to mold could lead to symptoms such as frequent headaches, allergies, respiratory problems, the development of chronic conditions like asthma or rhinitis, and even brain inflammation.

Consider These Tips: How to Get Rid of Black Mold on Ceiling

Black mold appears on the ceiling because of moisture, leakage, high humidity, roof damage, poor ventilation, condensation, etc. Once it appears, the mold can spread rapidly inside the home. Thus, as soon as you see black or dark green spots, you should consider getting rid of mold from the ceiling.

Using Bleach on Mold

Bleach is not only a good cleaning agent but also a good disinfectant for your ceiling. This can kill mold spores but on surfaces only. In using bleach, you need to prepare the following: a pair of gloves, chlorine bleach, water, dusting cloths, and a bucket.

  1. Use your gloves before making a solution of one part bleach and ten parts water in your bucket. Don’t forget to keep all windows open for maximum ventilation.
  2. Dip the end of your cloth into the solution and squeeze the excess water. Using a ladder, wipe off the ceiling and continue until you have removed the entire shape. Be gentle to make sure that the ceilings are clean and not damaged.
  3. Just use more cloth and prepare a solution if the water gets too dirty. You can use an old toothbrush especially to clean the bathroom ceiling and hard-to-reach areas.
  4. If you can’t see any mold on the ceiling, get a dry cloth and press it against the wet area to absorb as much water as possible. Use a fan to quickly dry the affected area. Let the bleach solution stay as the bleach acts as a germicide that prevents mold growth.

Using Vinegar on Mold

One of the natural ways of killing and cleaning mold in your ceilings is using vinegar. Many homeowners choose vinegar over-bleach since it is 100% natural and safe. Like bleach, vinegar can also prevent future mold growth. Collect and prepare the following items before you start:

  • Water
  • White Vinegar
  • Spray bottle
  • Scrubbing brush
  • Clean clothes/rags
  1. Pour white vinegar into a dry spray bottle and apply a sufficient amount to the mold-infected area of the ceiling. Allow it to sit for one hour before moving on to the next step.
  2. Wipe mold off ceilings with a clean cloth/rag dampened with water. You can also use a stiff bristle brush in getting rid of hardened fungi and stains more effectively.
  3. Dab or press against cleaned areas with a dry, absorbent cloth to absorb moisture. Use a fan and open the windows for continuous airflow of the ceiling area. This will help the area to dry quickly and let the vinegar smell escape.
  4. To prevent mold problems from recurring, the corners of the ceiling and other areas should be sprayed with the same vinegar in the bottle once or twice a week.

 

Mold Remediation and Mold Removal Services

Mold on your ceilings is unsightly, unhealthy, and uncomfortable! It only takes an inch of your ceiling for the mold to form. Before you know it, the entire ceiling of your house has been turned black by fungus!

If you feel anxious about the spread of any type of mold and mildew in your property, consider hiring mold expert specialists. At Superior Restoration, our skilled professionals use advanced methods and tools to help you get rid of mold not only on your ceiling but throughout your home.

We also offer emergency water damage restoration services. Please contact us anytime, Water Damage Murrieta. To better serve you and the surrounding areas, we are available 24/7.

clothes

Learn 5 Steps on How to Get Mold Out of Clothes

Mold on clothes can be a source of stress in the home. Mold stains can be tough to take out from clothes so getting rid of them quickly is necessary. Because the longer mold is left on clothes, the more difficult it will be to remove. 

When mold eats organic material such as cotton clothes, it will destroy the material slowly. Continue reading and learn a few tips on how to get mold out of clothes.

 

How to Get Rid of Mold on Clothes

Check the following steps on how to get mold out of clothes:

1. Always check your clothes/garment care labels. 

Follow the manufacturer’s instructions, especially when it comes to washing and drying. Follow the suggested water temperature for the garment and how it should be dried, too.

2. Use a mold stain remover or scrub it off using a toothbrush.

Using the products that will be tackled below, just apply the solution to the mold stain. If the fabric is tough, such as cotton or denim, gently scrub off the mold with a clean toothbrush and the solution of your choice. Be extra cautious not to damage the fabric in the process.

3. Pre-soaking or drying in the sun is necessary.

 Depending on the type of fabric, drying in the sun is effective in removing mold stains and helps to kill mold spores in the fabric. However, sunlight has a natural bleaching effect which can fade colors and damage fabrics that are delicate.

 Pre-soaking the mold-stained fabric/garment in one of the suggested solutions below for up to an hour can be a solution for delicate garments.

4. Washing your clothes/garments in hot water can kill mold and mildew.

 Hot water is effective not only at getting rid of allergens and bacteria but killing mold spores, too. But follow the care label’s instructions for the recommended and safest temperature to wash your clothing. If your clothing or fabric can’t be washed, you can take them to the dry cleaner.

5. Give a final hang-dry of your clothing in the sun. 

For the remaining mold stains, you may repeat some of the previous steps. Drying in the sun again will help zap any remaining mold.

 

Choosing the Right Product 

Now that you know how to get mold out of clothes, choose the most appropriate product below for your clothes. Make sure to test it on a concealed part of the fabric or clothes first and check the safety precautions recommended on the product’s label.   

  • Soap/laundry detergent – In bar, powder, or liquid form, you can directly rub in and rinse out with water. Then dry in the sun. 
  • Bleach – Chlorine bleach is effective at killing mold, but it will also fade any colored fabric/clothes.  
  • White Vinegar – Diluted vinegar can be applied directly to the mold stain. You can also pre-soak the clothing in a pail of water mixed with a cup of vinegar. In addition, you can also add 1-2 cups of vinegar to your washing machine per cycle. This can kill any moldy smells and mildew smells not only in clothes but in your home as well.  
  • Baking soda You can use it to wash white shirts and effectively deal with mold stains. Mix 1/4 cup baking soda with water to form a paste. Apply the paste to any mold patches. Then scrub it with a toothbrush and rinse with hot water.
  • Hydrogen Peroxide – To make a solution, combine 1 part 20% hydrogen peroxide with 4 parts water. This should only be used on organic fabrics such as cotton, linen, etc. 
  • Borax – Mix a half cup of borax with hot water according to instructions. Then add the solution directly into your washing machine, and wash the clothes as normal.

 The solutions suggested above are good for eliminating mold not only in your clothes but in other areas of your home as well such as in your bathroom, basement, etc. 

Prevent Mold on Clothes 

Avoid mold in the first place. Let’s jump in for some tips. 

1. Dry your clothes quickly. 

 Take your clothes out of your washer right away and dry them in a dryer or outside. Mold is more likely to grow in moist fabric or clothing.

2. Prepare a mold prevention spray.

You can spritz your clothes with vinegar spray, baking soda solution, or any natural mold remover of your choice every 2 weeks. This can prevent musty smelling of any clothing or clothes, thus leaving them smelling fresh. 

3. Maintain moisture levels at their minimum.

Mold in clothes can occur frequently especially if the humidity level in your home is 60% or more. Thus, maintaining low levels of moisture is key when it comes to prevention. Using a dehumidifier is an efficient way of controlling the levels of humidity. 

4. Maintain good ventilation in your home and closets.

Let fresh air circulate inside your home by opening windows and turning on fans. Close windows on rainy days to keep off humidity.

5. Check HVAC filters.

Screens are usually found in any ventilation, cooling, or heating system. So it is necessary to change the filter every one to three months to prevent mold growth and allergens.

Contact Professionals for Mold Remediation Services

The smell of mold on clothes can easily spread to other unaffected clothing items and eventually spread to your property. Mold spores are airborne and can easily proliferate to different areas and materials in your home. 

How to get mold out of clothes right away is very important to prevent damage and health issues in the future. Allow Superior Restoration to take care of the job. We offer professional mold remediation services.

Contact our local office, Water Damage Murrieta. We also provide services for water damage and fire damage restoration. We are available 24/7.                                                                                                                                                                               

attic

Learn Tips on How to Get Rid of Mold in Attic

Homeowners usually focus their attention on removing mold in different visible areas of their homes such as the bathroom. However, there is one important space that is often overlooked and neglected. And that is —– the attic. If you are not able to check the walls, floors, sides, and corners of your attic, then it needs a thorough check. Because ignored attics are likely to have a mold infestation. Moreover, if mold stays in your home for a long period of time, long-term effects can harm you and your family.  Please read on to learn a few tips on how to get rid of mold in the attic. In addition, hiring a professional for mold removal can be of big help in completely eradicating even the mold spores in your property.

 Why is there mold in the attic?

 Determining the cause of mold growth in your attic is the initial step in any mold remediation process. When there is an excess moisture problem in your attic plus the dark environment, it creates a perfect breeding ground for mold including black mold.

The top causes of mold in the attic are:

  • Inadequate / poor ventilation
  • Roof leaks
  • Siding or window leaks
  • Improper / insufficient insulation / poorly installed insulation
  • Poor or incorrect venting from the home’s bathroom, kitchen, or clothes dryer
  • Uninsulated air ducts
  • Improper installation of water heaters or furnaces

 If your home’s ventilation is not sufficient or the venting has not been properly installed,  the moist, warm air from the bathroom, kitchen, and clothes dryer will rise up. And it will go into the attic. When warm, moist air mixes with the cooler attic air ( especially in the colder months and high humidity), it can create a condensation issue that will lead to mold problems.

How to prevent mold in the attic?

 Prevention of mold is way better than spending a lot of time and money on damages (structural and health) in the long run. First, make sure where the moisture is coming from and repair any venting or insulation issues that you might find. 

  • Proper insulating your attic to keep off mold growth.
  • Reduce moisture by sealing the sources such as gaps and cracks where the moisture seeps through.
  • Make sure that there is adequate ventilation in your attic. You can do this by determining the amount of roof ventilation required for the attic space.
  • Make sure there is a minimal difference in temperature inside the attic and outside to prevent condensation on the underside of roof sheathing.
  • Make sure to check for blocked ventilation or damage. Rafter ventilation or baffles should not be damaged or blocked with insulation. Fix broken or improperly installed rafter ventilation/baffles.
  • Check the roof for any leaks or damages. Repair the roof if necessary.
  • Air seal all points of entry such as fans and hoses in the bathroom or recessed lighting/ pot lights. Use low-temperature light bulbs (LED) and install or repair weather stripping around the attic hatch. Moreover, seal around holes, gaps, and cracks inside the attic including wiring, plumbing vent pipes, or ducts (in some instances).
  • Vent appliances used in your bathroom, kitchen, and dryer should blow the air to the outside.

 How to get rid of mold in the attic?

 After correcting the source of mold in your attic, you can also try the following ideas to correct mold issues yourself. Check how:

  • Protect yourself completely by using protective gear such as a disposable mask, goggles, rubber gloves, etc.
  • Remove all items from your attic and place them in thick bags. Get rid of all items that are covered by mold-like carpeting, drywall, etc.
  • Close all openings, including windows and vents with plastic.
  • Treat moldy areas by using cleaners and disinfectants of your choice, chemically or naturally. Bleach is effective in removing surface molds. Natural products such as vinegar, baking soda, borax, tea tree oil, etc. are also useful and effective in eliminating mold in your attic.
  • Spray the moldy areas with a solution of your choice and use a wire brush to scrub the attic. Allow it to dry before removing the plastic sheeting.

Does homeowners insurance policy cover mold in the attic?

 Your homeowner’s insurance will only cover mold damage if the damage occurred from an accident that has been reported right away.

 Mold damage in the attic can be covered as water damage in this area of a home and can go unnoticed for months. For instance, if you are hit by a harsh winter with much snow, ice, and rain, water leaks can enter through your roof going into your attic. If this is the case, your insurance will likely cover the damage.

However, the homeowner’s insurance policy will not cover mold damage in your attic due to negligence. For example, if you have not been up to your attic for over a year and when you do, you suddenly find out that mold has formed on the walls.  But there is no sign of any leaks or cracks.

 Seek Attic Mold Removal Experts

 After a few days/ weeks in spite of your effort in getting rid of mold in the attic and mold keeps returning, consider hiring an expert. Especially if the affected area is more than 10 square feet, you should contact an IICRC certified company. Superior Restoration offers professional residential and commercial mold remediation services.

 Please don’t hesitate to contact Water Damage Murrieta. We offer mold cleanup, water damage, and fire damage restoration. Our office is open 24 hours a day, 7 days a week.

broken pipe

What Should I Do When A Pipe Bursts In My Home

Aside from catastrophe and natural disasters, a burst pipe is another nuisance for a homeowner like you. Knowing what to do when a pipe bursts in your home is very important. Because if not, you may have to deal with significant water damage. This article will show you how to recognize the signs of a damaged water pipe and the first things to do when a pipe bursts in your home.

Signs of a Burst Pipe

In some cases, a damaged water pipe can show some warning signs before it could cause serious damage. So, watch out for signs of a pipe burst. This includes;

Puddles that form under the sink

One of the easiest ways to know that you are dealing with a burst pipe is the puddles of water. Carefully check the wall above the pipe cover plates for any moist areas. Also, when the leak occurs, the water will begin to accumulate in the area directly below the damaged pipe. So, you can easily know if you are dealing with a busted pipe.

Fluctuating water pressure

When the water pressure goes up and down, it might be because of the busted pipe that occurred in your home. With a burst pipe, the water pressure changes. It can also affect how the water travels through water pipes.

Discolored water with the rusty smell

Discoloration of water is another good indication of a burst pipe. The water can normally appear in red/brown in color. Damaged pipes can release microscopic rust particles that can cause water to discolor.

Similar to the discoloration of water, a strange smell is also a sign of a busted pipe. So, make sure to keep an eye on these signs.

Pipes making clanging noises

A broken pipe can have an impact on the water pressure throughout your home and cause movement in the system. When the water flows, pipes begin to bang and rub at tension points and cause clanging noises behind walls. What is even worse about it, is the more friction there is the bigger the breakage would be.

Increase in your water bill

Excess amounts of water from leaks or breaks can waste around 100 gallons every year. When multiplied, this leakage can cause your water bill to suddenly spike. Also, a busted pipe can cause homeowners to use more water than normal because a burst has affected the water pressure.

What To Do When A Pipe Bursts in Your Home

When things get out of control and you have to deal with a burst pipe, follow these steps.

1. Turn off the water and drain the faucets

To locate the burst pipe, start by turning off the water supply at its main shutoff valve. It’s very important to immediately do it. The sooner you turn off the water supply to your home, the better your chances are in minimizing water damage. The main shutoff valve is usually located near your water heater, in your basement, or crawl space.

After turning off the water, open the faucets to drain the remaining water in your pipes. This will help take off some of the pressure of the pipes and prevent further leakage. Also, flush all the toilets to drain the water from them. Once the water is completely drained, the leak will stop.

2. Turn off the power supply

Always turn off your home’s electricity at the main power supply before you begin repairing your damaged pipe.

3. Call a plumber

As soon as possible, call a professional to handle the repairs.  Contact a professional plumber to diagnose the problem and do the necessary repairs. Furthermore, if there is damage to the electrical system, contact a reliable electrician.

3. Document the damage

If the damage caused by your burst pipe appears to be extensive, you should begin taking photos and even videos of the affected areas and personal belongings. These materials will be used when filing an insurance claim. Take a close-up photo of every item that has been damaged, along with the water lines. Take as many photos as you can because the more you have, the greater your chances are of getting a claim.

4. Start cleaning the water

To prevent further water damage, remove any standing water as soon as possible. When a pipe bursts, water can cause extensive damage to your home and personal belongings. But the sooner you clean the water, the less likely you are to deal with irreparable damage to your belongings. Also, when you remove the water quickly, you can prevent mold and mildew growth.

DIY Tips in Cleaning Your Flooded Home

1. Remove any excess water that you can from the affected area. These might include carpets, furniture, and electronics. Keep them in a safe, dry place.

2. You can use old towels, a mop, and a bucket to dry the affected area. You may also consider using a wet-dry vacuum to quickly and efficiently remove standing water.

3. If you have to thaw a frozen pipe, turn on the heating system to do it. But, never use a hair dryer as it can damage the pipe itself.

4. Keep windows and doors open to allow fresh air or warm air in. Set up fans and dehumidifiers for additional airflow. This also helps in drying the affected area.

5.If the broken pipes are located behind a kitchen wall, make sure to dry out all nearby cabinets and drawers after the cleanup.

Professional Water Damage Restoration Services

If your home suffers from water damage due to a burst pipe, contact a reliable water damage restoration company. A restoration company, like Superior Restoration, will take care of the water damage cleanup, as well as offer mold remediation/removal services.

Water Damage Murrieta (of Superior Restoration) has a team of experienced professionals ready to help you with complete water damage restoration and cleanup services. Contact our office today for more information.

damaged wood floor

How To Repair Your Water Damaged Wood Floor

Wood flooring is increasing its popularity to many homeowners because of the versatility of styles and affordability. However, wood’s natural fibers readily absorb water, and therefore, it is not resistant to humidity, spills, and standing liquids. Wood floor water damage is annoying and a common problem that can damage the structure of your home permanently. Thus, it is important to act fast and restore your water damaged wood floor.

Protect your wood floor from water damage and seek professional help immediately, especially if the damage is extensive.

Water Damaged Wood Floor

Water-damaged wood flooring can cause the wood to sag, making it warped and not even. You can easily notice even hardwood floor water damage due to cupping and curving of the floorboards creating raised bumpy appearance.

The longer your wood floor is left untreated, the bigger damage it will have. The damage is irreversible and may require a full restoration, even changing of the affected areas of flooring. Water and wood never mix so it is very important to act fast and deal with it as soon as possible to salvage wood, prevent mold growth, and further damage.

How to Restore your Water Damaged Wood Floor

Excess moisture can damage your hardwood floors because the material is naturally porous. So you have to begin cleaning and drying the affected areas as soon as possible.

1. Identify and stop the source of water before drying anything out.

Check for leaks or burst pipes that could be the cause of water damage to your wood floor. Then, repair the damage before cleaning up.

2. Move all furniture out of water-damaged areas

To hasten the drying process, move all the affected materials into a dry and safe place. Open doors and windows to increase air circulation if it is not too cold outside.

3. Use a large wet vacuum to extract water from the floor and do this twice.

This is to prevent buckling wood floors and warped boards from becoming loose due to moisture.

4. Gently scrub the floor to remove dirt, grease, and oily compounds that can damage the hardwood floor’s finish.

Use a non-lathery detergent that is specially formulated for cleaning and disinfecting wood floors.

5. Completely dry the area

It will take at least 24 hours to complete the drying process of hardwood floors. Put as many fans as you can so they can create multiple cross-currents of air. Moreover, run a dehumidifier as well and it should be in the center of the room. Others may dry out completely for several days. A moisture meter will check to ensure that the floors are completely dried.

6. Use a moisture meter to check the wood flooring every day.

Preventing mold after extensive water damage to your home is crucial. With a moisture meter, you can check the condition of your flooring. Look for signs of mold or mildew and scrub with a mixture of water and baking soda.

 

You can’t always save a laminate floor

Laminate flooring is constructed with a fiber core which makes the material absorb water and swell easily. In addition, ensure that the subflooring is totally clean and dry. Any replacement flooring will continue to absorb moisture and lead to extensive damage.

 

 Get Help From Our Professionals at Superior Restoration

Wooden floors can be saved from water damage once addressed immediately. If there is a small amount of water damage to your wood floor, you may be able to treat it without the help of the experts. Nevertheless, if there is excess water that leads to significant water damage, then it is time to seek help from trained professionals.

It can be very expensive to repair water-damaged wood floors so hiring a restoration specialist can save the expense of changing your floors. The experienced restoration contractor from Superior Restoration can help you with the claims process of your insurance company since it covers most water damage.

If you are not sure how to deal with your wood floor water damage, please contact the experts at Water Damage Murrieta. We offer 24/7 water damage restoration services.