Learn Tips On How to Get Rid Of Mold in The Attic (1)

Learn Tips on How to Get Rid of Mold in Attic

Homeowners usually focus their attention on removing mold in different visible areas of their homes such as the bathroom. However, there is one important space that is often overlooked and neglected. And that is —– the attic. If you are not able to check the walls, floors, sides, and corners of your attic, then it needs a thorough check. Because ignored attics are likely to have a mold infestation. Moreover, if mold stays in your home for a long period of time, long-term effects can harm you and your family.  Please read on to learn a few tips on how to get rid of mold in the attic. In addition, hiring a professional for mold removal can be of big help in completely eradicating even the mold spores in your property.

 Why is there mold in the attic?

 Determining the cause of mold growth in your attic is the initial step in any mold remediation process. When there is an excess moisture problem in your attic plus the dark environment, it creates a perfect breeding ground for mold including black mold.

The top causes of mold in the attic are:

  • Inadequate / poor ventilation
  • Roof leaks
  • Siding or window leaks
  • Improper / insufficient insulation / poorly installed insulation
  • Poor or incorrect venting from the home’s bathroom, kitchen, or clothes dryer
  • Uninsulated air ducts
  • Improper installation of water heaters or furnaces

 If your home’s ventilation is not sufficient or the venting has not been properly installed,  the moist, warm air from the bathroom, kitchen, and clothes dryer will rise up. And it will go into the attic. When warm, moist air mixes with the cooler attic air ( especially in the colder months and high humidity), it can create a condensation issue that will lead to mold problems.

How to prevent mold in the attic?

 Prevention of mold is way better than spending a lot of time and money on damages (structural and health) in the long run. First, make sure where the moisture is coming from and repair any venting or insulation issues that you might find. 

  • Proper insulating your attic to keep off mold growth.
  • Reduce moisture by sealing the sources such as gaps and cracks where the moisture seeps through.
  • Make sure that there is adequate ventilation in your attic. You can do this by determining the amount of roof ventilation required for the attic space.
  • Make sure there is a minimal difference in temperature inside the attic and outside to prevent condensation on the underside of roof sheathing.
  • Make sure to check for blocked ventilation or damage. Rafter ventilation or baffles should not be damaged or blocked with insulation. Fix broken or improperly installed rafter ventilation/baffles.
  • Check the roof for any leaks or damages. Repair the roof if necessary.
  • Air seal all points of entry such as fans and hoses in the bathroom or recessed lighting/ pot lights. Use low-temperature light bulbs (LED) and install or repair weather stripping around the attic hatch. Moreover, seal around holes, gaps, and cracks inside the attic including wiring, plumbing vent pipes, or ducts (in some instances).
  • Vent appliances used in your bathroom, kitchen, and dryer should blow the air to the outside.

 How to get rid of mold in the attic?

 After correcting the source of mold in your attic, you can also try the following ideas to correct mold issues yourself. Check how:

  • Protect yourself completely by using protective gear such as a disposable mask, goggles, rubber gloves, etc.
  • Remove all items from your attic and place them in thick bags. Get rid of all items that are covered by mold-like carpeting, drywall, etc.
  • Close all openings, including windows and vents with plastic.
  • Treat moldy areas by using cleaners and disinfectants of your choice, chemically or naturally. Bleach is effective in removing surface molds. Natural products such as vinegar, baking soda, borax, tea tree oil, etc. are also useful and effective in eliminating mold in your attic.
  • Spray the moldy areas with a solution of your choice and use a wire brush to scrub the attic. Allow it to dry before removing the plastic sheeting.

Does homeowners insurance policy cover mold in the attic?

 Your homeowner’s insurance will only cover mold damage if the damage occurred from an accident that has been reported right away.

 Mold damage in the attic can be covered as water damage in this area of a home and can go unnoticed for months. For instance, if you are hit by a harsh winter with much snow, ice, and rain, water leaks can enter through your roof going into your attic. If this is the case, your insurance will likely cover the damage.

However, the homeowner’s insurance policy will not cover mold damage in your attic due to negligence. For example, if you have not been up to your attic for over a year and when you do, you suddenly find out that mold has formed on the walls.  But there is no sign of any leaks or cracks.

 Seek Attic Mold Removal Experts

 After a few days/ weeks in spite of your effort in getting rid of mold in the attic and mold keeps returning, consider hiring an expert. Especially if the affected area is more than 10 square feet, you should contact an IICRC certified company. Superior Restoration offers professional residential and commercial mold remediation services.

 Please don’t hesitate to contact Water Damage Murrieta. We offer mold cleanup, water damage, and fire damage restoration. Our office is open 24 hours a day, 7 days a week.

What Should I Do When A Pipe Bursts In My Home

What Should I Do When A Pipe Bursts In My Home

Aside from catastrophe and natural disasters, a burst pipe is another nuisance for a homeowner like you. Knowing what to do when a pipe bursts in your home is very important. Because if not, you may have to deal with significant water damage. This article will show you how to recognize the signs of a damaged water pipe and the first things to do when a pipe bursts in your home.

Signs of a Burst Pipe

In some cases, a damaged water pipe can show some warning signs before it could cause serious damage. So, watch out for signs of a pipe burst. This includes;

Puddles that form under the sink

One of the easiest ways to know that you are dealing with a burst pipe is the puddles of water. Carefully check the wall above the pipe cover plates for any moist areas. Also, when the leak occurs, the water will begin to accumulate in the area directly below the damaged pipe. So, you can easily know if you are dealing with a busted pipe.

Fluctuating water pressure

When the water pressure goes up and down, it might be because of the busted pipe that occurred in your home. With a burst pipe, the water pressure changes. It can also affect how the water travels through water pipes.

Discolored water with the rusty smell

Discoloration of water is another good indication of a burst pipe. The water can normally appear in red/brown in color. Damaged pipes can release microscopic rust particles that can cause water to discolor.

Similar to the discoloration of water, a strange smell is also a sign of a busted pipe. So, make sure to keep an eye on these signs.

Pipes making clanging noises

A broken pipe can have an impact on the water pressure throughout your home and cause movement in the system. When the water flows, pipes begin to bang and rub at tension points and cause clanging noises behind walls. What is even worse about it, is the more friction there is the bigger the breakage would be.

Increase in your water bill

Excess amounts of water from leaks or breaks can waste around 100 gallons every year. When multiplied, this leakage can cause your water bill to suddenly spike. Also, a busted pipe can cause homeowners to use more water than normal because a burst has affected the water pressure.

What To Do When A Pipe Bursts in Your Home

When things get out of control and you have to deal with a burst pipe, follow these steps.

1. Turn off the water and drain the faucets

To locate the burst pipe, start by turning off the water supply at its main shutoff valve. It’s very important to immediately do it. The sooner you turn off the water supply to your home, the better your chances are in minimizing water damage. The main shutoff valve is usually located near your water heater, in your basement, or crawl space.

After turning off the water, open the faucets to drain the remaining water in your pipes. This will help take off some of the pressure of the pipes and prevent further leakage. Also, flush all the toilets to drain the water from them. Once the water is completely drained, the leak will stop.

2. Turn off the power supply

Always turn off your home’s electricity at the main power supply before you begin repairing your damaged pipe.

3. Call a plumber

As soon as possible, call a professional to handle the repairs.  Contact a professional plumber to diagnose the problem and do the necessary repairs. Furthermore, if there is damage to the electrical system, contact a reliable electrician.

3. Document the damage

If the damage caused by your burst pipe appears to be extensive, you should begin taking photos and even videos of the affected areas and personal belongings. These materials will be used when filing an insurance claim. Take a close-up photo of every item that has been damaged, along with the water lines. Take as many photos as you can because the more you have, the greater your chances are of getting a claim.

4. Start cleaning the water

To prevent further water damage, remove any standing water as soon as possible. When a pipe bursts, water can cause extensive damage to your home and personal belongings. But the sooner you clean the water, the less likely you are to deal with irreparable damage to your belongings. Also, when you remove the water quickly, you can prevent mold and mildew growth.

DIY Tips in Cleaning Your Flooded Home

1. Remove any excess water that you can from the affected area. These might include carpets, furniture, and electronics. Keep them in a safe, dry place.

2. You can use old towels, a mop, and a bucket to dry the affected area. You may also consider using a wet-dry vacuum to quickly and efficiently remove standing water.

3. If you have to thaw a frozen pipe, turn on the heating system to do it. But, never use a hair dryer as it can damage the pipe itself.

4. Keep windows and doors open to allow fresh air or warm air in. Set up fans and dehumidifiers for additional airflow. This also helps in drying the affected area.

5.If the broken pipes are located behind a kitchen wall, make sure to dry out all nearby cabinets and drawers after the cleanup.

Professional Water Damage Restoration Services

If your home suffers from water damage due to a burst pipe, contact a reliable water damage restoration company. A restoration company, like Superior Restoration, will take care of the water damage cleanup, as well as offer mold remediation/removal services.

Water Damage Murrieta (of Superior Restoration) has a team of experienced professionals ready to help you with complete water damage restoration and cleanup services. Contact our office today for more information.

How To Repair Your Water Damaged Wood Floor

How To Repair Your Water Damaged Wood Floor

Wood flooring is increasing its popularity to many homeowners because of the versatility of styles and affordability. However, wood’s natural fibers readily absorb water, and therefore, it is not resistant to humidity, spills, and standing liquids. Wood floor water damage is annoying and a common problem that can damage the structure of your home permanently. Thus, it is important to act fast and restore your water damaged wood floor.

Protect your wood floor from water damage and seek professional help immediately, especially if the damage is extensive.

Water Damaged Wood Floor

Water-damaged wood flooring can cause the wood to sag, making it warped and not even. You can easily notice even hardwood floor water damage due to cupping and curving of the floorboards creating raised bumpy appearance.

The longer your wood floor is left untreated, the bigger damage it will have. The damage is irreversible and may require a full restoration, even changing of the affected areas of flooring. Water and wood never mix so it is very important to act fast and deal with it as soon as possible to salvage wood, prevent mold growth, and further damage.

How to Restore your Water Damaged Wood Floor

Excess moisture can damage your hardwood floors because the material is naturally porous. So you have to begin cleaning and drying the affected areas as soon as possible.

1. Identify and stop the source of water before drying anything out.

Check for leaks or burst pipes that could be the cause of water damage to your wood floor. Then, repair the damage before cleaning up.

2. Move all furniture out of water-damaged areas

To hasten the drying process, move all the affected materials into a dry and safe place. Open doors and windows to increase air circulation if it is not too cold outside.

3. Use a large wet vacuum to extract water from the floor and do this twice.

This is to prevent buckling wood floors and warped boards from becoming loose due to moisture.

4. Gently scrub the floor to remove dirt, grease, and oily compounds that can damage the hardwood floor’s finish.

Use a non-lathery detergent that is specially formulated for cleaning and disinfecting wood floors.

5. Completely dry the area

It will take at least 24 hours to complete the drying process of hardwood floors. Put as many fans as you can so they can create multiple cross-currents of air. Moreover, run a dehumidifier as well and it should be in the center of the room. Others may dry out completely for several days. A moisture meter will check to ensure that the floors are completely dried.

6. Use a moisture meter to check the wood flooring every day.

Preventing mold after extensive water damage to your home is crucial. With a moisture meter, you can check the condition of your flooring. Look for signs of mold or mildew and scrub with a mixture of water and baking soda.

 

You can’t always save a laminate floor

Laminate flooring is constructed with a fiber core which makes the material absorb water and swell easily. In addition, ensure that the subflooring is totally clean and dry. Any replacement flooring will continue to absorb moisture and lead to extensive damage.

 

 Get Help From Our Professionals at Superior Restoration

Wooden floors can be saved from water damage once addressed immediately. If there is a small amount of water damage to your wood floor, you may be able to treat it without the help of the experts. Nevertheless, if there is excess water that leads to significant water damage, then it is time to seek help from trained professionals.

It can be very expensive to repair water-damaged wood floors so hiring a restoration specialist can save the expense of changing your floors. The experienced restoration contractor from Superior Restoration can help you with the claims process of your insurance company since it covers most water damage.

If you are not sure how to deal with your wood floor water damage, please contact the experts at Water Damage Murrieta. We offer 24/7 water damage restoration services.

7 Tips To Remove and Prevent Mold On Bathroom Ceiling

7 Tips To Remove and Prevent Mold On Bathroom Ceiling

Most homeowners usually give the least importance to cleaning bathroom ceilings. It is often ignored because a typical ceiling is hard to reach for the average American. As a matter of fact, the ceiling can be a breeding ground for dirt, debris, insects, and germs. And it’s a perfect place for mold growth due to excessive moisture in the bathroom.

 Like any other part of the house, your bathroom ceiling also needs love and care to look its best. Thus, cleaning and prevention of mold on the bathroom ceiling are necessary so you and your loved ones can breathe easier when you are home.

 

Why does mold develop on your bathroom ceiling?

 Bathroom mold issues and moisture usually occur on the ceiling due to the following reasons: 

a.) Humidity issues happen when warm, dampened air reacts with a cool ceiling causing condensation and mold growth. 

b.) Liquid moisture issues are due to direct exposure to liquid/water such as roof leaks, plumbing failures, etc.

 

How To Prevent and Remove Mold on Bathroom Ceiling

The bathroom ceiling is perhaps one of the most susceptible to the growth of fungus such as mold. Due to repeated exposure to water and humidity every day, it is an ideal environment for mold to grow and thrive. Mold on your bathroom ceiling poses serious health risks to you and your family especially if not taken care of immediately. 

According to EPA, you can do cleaning alone as long as the affected area is less than 9 square feet area. Bigger than that, it is best to contact trained professionals to help you out. Otherwise, consider the following tips to remove the mold yourself and how to prevent it.

1. Always wear protective gear

The first thing you should do before doing any cleanup is putting on your mask, gloves, and goggles. Mold and cleaners can cause health problems if inhaled so make sure you protect yourself.

2. Identify the cause

Pull back the insulation and check for mold problems. Leaks cause water damage particularly roof leaks so fix them as soon as possible.

3. Prepare your preferred cleaner

You can choose from a variety of mold-killing products in the market or natural homemade mold-busting solutions. 

Bleach: Put the mixture ( 25% bleach and 75% water) in a spray bottle. Spray directly onto the surface that contains mold. Let it soak for 10-15 minutes then scrub the molded area lightly with a scrub brush.

Hydrogen Peroxide: To clean thoroughly, spray the affected area and let it sit for 10-15 minutes. Scrub the area then rinse it with water. Repeat if necessary.

Vinegar: Spray the area and let it sit for at least 15 minutes or up to one hour. Then scrub the area then rinse it with water.

Baking Soda: Add 1 teaspoon to a tablespoon of baking soda to an empty spray bottle. Fill the bottle with ¾  of hot water then shake to dissolve. Spray the area and scrub to clean the mold then, rinse with clean water.

4. Insulate the ceiling

Mold on your bathroom ceiling usually happens due to changes in temperature. The ceiling’s cool parts encourage condensation, so adding layers of insulation is helpful. This makes the surface of the ceiling warmer and will lower the risk of mold growth. 

 If you know how to insulate your bathroom, you can make it a DIY project. You can insulate the ceiling using fiberglass which is a good option.

5. Install bathroom fans

Oftentimes, mold on bathroom ceilings is caused by humidity. Especially if your bathroom doesn’t have a window, an exhaust fan or a vent fan is necessary. In addition, mounting a bathroom or ventilation fan is very helpful to reduce mold. 

6. Invest in a dehumidifier

Excessive moisture can lead to more mold spores spread in the bathroom. Purchasing your own dehumidifier is a big help because it lowers the moisture content in the bathroom. Buying a specific model for the bathroom means that it has concealed wiring to prevent the risk of fire. If you are concerned with saving and conserving electricity, you can set the dehumidifier on a timer. 

7. Paint to cover

Mold on bathroom ceilings may leave marks and stains even after removing them. You can use mold-resistant paint to cover the stains but be sure to check that all the mold is gone. Never paint over existing mold because this will just cover the mold and allow mold growth behind the paint.

 Mold Remediation By Superior Restoration

Still, upset with mold on your bathroom ceiling? If you have done everything and still think your cleaning efforts weren’t successful, depend on the professional remediation team. Our qualified technicians have the right tools for removing black mold or any type of mold on the ceiling quickly.

Please don’t hesitate to contact Water Damage Murrieta, today! We are open for 24 hours, 7 days a week to better serve you.

 

Washing Machine Water Damage_ Causes and Prevention Tips

Washing Machine Water Damage: Causes and Prevention Tips

Washing machines are very useful and essential tools that lighten every homeowner’s load of laundry. They get modernized these days, however, they aren’t exempted from being one of the leading causes of water damage. And this can be very expensive and frustrating especially if not taken care of immediately. Having a good understanding of the causes can help you prevent washing machine water damage. In this article, you will learn the most common cause of washing machine water damage and its prevention tips.

What Causes Water Damage From a Washing Machine

Where is the water coming from? The following are common ways that your washing machine may cause water damage to your home:

  • Supply Hose Failure

The issues related to supply hose are the top cause of washing machine water damage. Supply hose failure happens when there’s a poor connection to the wall or washing machine and pinching of the hose during installation or replacement. Moreover, having an outdated supply hose is another cause that leads to brittleness.

  • Washing Machine Overloading

When you overload your washing machine, it can result in loosened valves, gaskets, and cracks which can contribute to internal leakage. Internal leaks can be a threat to your health due to water exposure that’s been in contact with the detergent, clothes’ dirt residues, and washing machine parts. Another negative effect is flooding in your laundry room which can be frustrating and can lead to water damage. Besides, too much detergent can cause flood damage due to excessive suds that can leak out of the machine.

  • Clogged Drainage Issues

The drainage system of your washing machine can lead to water damage issues caused by clogged draining pipes or improper alignment of pipes. Another reason is when your sewer backs up. Water damage caused by clogs can cause serious health problems. So it is best to bring in professionals to help you prevent water damage problems.

 Tips to Prevent Water Damage from Washing Machines

The most effective ways of preventing damage from your washing machine are the following:

  1. Install a water leak detector to get alerts in case of leaks. This device can help prevent flooding by shutting off hot and cold water supplies automatically to the washer.
  2. Check water supply hoses regularly for worn tubing, cracks, loose connections, or blisters. Change damaged hoses.
  3. Don’t overload your washing machine. Read the manufacturer’s guide and distribute clothes inside the machine evenly.
  4. Shut off water to both supply valves when the machine is idly sitting or if you will be away for several days. Change any valve that’s leaking and not properly operating.
  5. Use the right detergent for your washing machine and know how much to use to avoid excessive suds and bubbles. This can cause the washer to overflow. 
  6. Change hoses every five years to prevent water damage from washing machines. Even if they don’t seem damaged, replace them still since deterioration occurs inside the hose and may not be visible.
  7. Ensure that the drain hose is tightly inserted into the main drain line to prevent it from dislodging when the washer drains.
  8. Prevent the drain and supply hoses from becoming kinked by leaving at least four inches of space between the wall and your washer.

Seek Pros for Washing Machine Water Damage Cleanup and Restoration Services

The effects of water damage can be very devastating. In minutes, water can affect walls, floorings, and other surrounding materials. If not dealt with immediately can lead to costly repairs. Thus, quick actions are very crucial. Should your home suffers from washing machine water damage, contact professionals at Superior Restoration immediately.  We are here to help you with all of your water damage concerns and restoration needs. 

Please don’t hesitate to call our local office today, Water Damage Murrieta. We also offer round-the-clock water damage restoration services. 

 

Kitchen Fire Damage Clean Up

Kitchen Fire Damage Clean Up

Cooking in the kitchen can be a good bonding activity for the entire family. However, this can also turn into a mishap in just a few minutes. Even a splatter of small grease can ignite and start a kitchen fire. Then comes smoke and soot that can stain ceilings and walls plus the overpowering smell in the air. Fire damage in the kitchen can have a lasting impact on the structural integrity of your property. It could also compromise the safety of the space and your health if not addressed immediately.  

DIY Kitchen Fire Damage Cleanup

You can clean the mess by yourself but you need to know how to clean up after a kitchen fire the right way. The wrong techniques can make the soot spread around the house, create stains permanently and threaten your health as well.

Document the Damage

Document the damage before you do any cleaning and make sure that it’s safe to enter the kitchen.  Take as many pictures as you can for your insurance claim as well as making a list of damaged items. File a claim with your insurance provider so they can send an agent to make an estimate. You can proceed with the kitchen fire damage cleanup once the insurance adjuster evaluates the damage and tells you to do so.

Kitchen Fire Damage Cleanup

Make sure to read the FEMA guide to help you in dealing with fire damage. The following are some tips that would make your cleaning project a little easier.

1. Protect yourself as you work.

  • Wear protective gear by wearing face masks, goggles, rubber gloves, long sleeves, long pants, and boots. Soot particles from a kitchen fire cover everything and can penetrate your lungs, skin, and eyes. And this poses serious risks to your health.

2. Begin clearing the air.

  • Open all your windows and doors to air out the smoke and odors.  Set up fans and place them in opposite corners of the kitchen. The AC should be off when you clean to avoid contaminated air circulating into your ductwork and your house.
  • If the HVAC system was on when the fire broke out, change the filters.

3. Patiently clean the surfaces.

  • Getting rid of all soot from surfaces is not one click. Clean the surface with a cleaning product, rinse, then dry the area thoroughly, and clean again. This makes the cleanup process more efficient though you need to do this patiently. Moreover, this also aids in preserving finishes on cabinets and walls with semi-gloss paint. For flat finishes, soot will stain through the new primer and paint so clean first then repaint.

4. Go with the right cleaners. 

  • Effective alternatives to ordinary household cleaners are recommended. Please check the following:

a.) Degreaser Products – These cleaners can cut through soot film on various types of surfaces but they are milder than TSP. 

b.) Trisodium Phosphate – TSP mixed with water works well on sticky soot residue. This product is strong so wear gloves and avoid splashing. In addition, TSP is not intended for cleaning ceramic tile or chrome fixtures.

c.) Dry Soot Sponges – Dry sponge material is designed to get rid of residue even without using liquid cleaning products or water. They clean all surfaces including fabric effectively especially when you’re careful in rinsing and drying soot sponges between each use.

5. Check drawers, cabinets, and appliances. 

  • Empty drawers and kitchen cabinets to clean the space inside.
  • Clean shelves and walls. 
  • Try to check rubber gasket seals around appliance doors for any signs of damage.
  • Make sure to clean condenser coils on the back of the fridge.

Get Rid of That Smell

Your entire home is still affected by odors even when flames are confined to the kitchen. The following quick tips will help you freshen up your entire house.

  • Once you get rid of all soot, clean non-porous surfaces with an orange citrus cleaner.
  • Leave open coffee containers in closed cabinets to fight odors.
  • You can also place bowls of vinegar throughout the house to absorb lingering smells.
  • Before running the vacuum, sprinkle baking soda on carpets and leave for several hours.
  • Call in a restoration company to set up ozone generating equipment that can quickly freshen the air.

 

Let Superior Restoration Handle the Cleanup

Smoke damage cleanup is best handled by professionals because they use state-of-the-art techniques during the process.

Call our local office today, Water Damage Murrieta. We’ll get your kitchen back to normal as quickly as possible and we’re here 24/7 to better serve you!

Water Damage Behind Shower Tiles

Water Damage Behind Shower Tiles

Tiles are part of interior design and play an important role in making a wonderful bathroom ambiance. However, your bathroom is attacked by various villains waiting to lurk in the tiles and grout or settle on the glass and walls. Thus, making your showers or bathroom unhygienic, smelly, and even look terrible. Because the bathroom is the domain of water, the result could be water damage behind shower tiles. This is one of the common problems in the bathroom which shouldn’t be ignored.

 

What Happens If Water Gets Behind Tiles?

Water can cause damage especially if it seeps behind shower tiles. Over time, the caulk between the shower wall and the surface of your bathtub will dry up and crack allowing water to get behind the tiles and soak into the wall. Moreover, if there are missing tiles or grout, water can also seep into the shower wall. This will weaken the wallboard and tiles may fall off. Mold can also proliferate inside bathroom walls.

To sum up the signs of water damage behind shower tiles, check the following:

  1. Discoloration, cracks, or swells in tile grout
  2. Misaligned single tiles with the existing grid
  3. Loose or falling tiles
  4. Peeling caulk around the shower base and bottom tiles
  5. Musty odors that stay even after cleaning

Stop The Leak Of Your Shower Tile

Replace the missing caulk or grout to stop your shower tile from leaking. But you need to fix the wall first before applying caulk if the water is leaking. Take a look at the steps of the whole repair process.

Steps to Repair Water Damage Behind Shower Tiles

1. Assessing the Damage

To avoid recurrence and save money, identify the cause of the wall damage. Problems such as loose and missing grout between tiles or missing caulk allow water to penetrate the wall and cause damage.

2. Cutting out the Caulk

Use a utility knife and carefully cut out the caulk so as not to scratch tiles or bathtub. You can also use rubbing alcohol to scrub away caulk.

3. Removing and Cleaning the Tiles

Use a putty knife to remove the shower tiles. Then soak the tiles in warm water to get rid of caulk and adhesive. You may sometimes still need to scrub the tiles even after soaking. Next, set them aside to dry.

4. Cutting Away Damaged Drywall and Drying the Wall

Use a drywall saw to make a straight cut two inches above the water-damaged wall. Then use a fan to dry the wall and studs entirely. You can use a high-volume fan to dry them quickly like in 12 to 24 hours.

5. Cutting and Installing New Drywall

Use a moisture-resistant cement board to fix your shower wall. Just cut a piece smaller than the opening and then screw it to the wall studs. 

6. Taping and Mudding the Wall Joint

Apply self-adhesive drywall tape and joint compound so you can seal the gap. Then allow the mud to dry completely before sanding to form smooth seams.

7. Reinstalling the Tile

Apply an even layer of thin-set to the wall using a notched trowel, then press the tiles into the wall. Let the thin-set cure before proceeding.

8. Applying the Grout and Caulk

Use new grout that would match the actual tile. Allow the grout to dry before moving on then apply silicone caulk between the tiles and the bathtub.

Prevent Water-Damaged Shower Walls

To avoid these problems from happening again and save time and money, consider the following tips to prevent water damage from your shower walls:

  • Address any water issues such as leaks right away.
  • Reseal grout joints at least once a year with a good product.
  • Avoid using harsh cleaners such as acidic products when cleaning your bathroom.
  • Upgrade the ventilation system of your bathroom to control humidity.
  • If possible, open the windows of your bathroom for fresh air.
  • Wipe shower walls to prevent molds.
  • Tap tiles from time to time to check for a hollow sound.

Consider Bathroom Water Damage Restoration

Need help in repairing bathroom water damage? Specialists from Superior Restoration are here to save your day! We offer 24-hour service. Contact us today, Water Damage Murrieta.

What Causes Bathroom Flooding and How To Deal With It_

What Causes Bathroom Flooding and How To Deal With It?

Bathroom flooding really causes stress to homeowners especially if it’s not taken care of immediately. Moreover, it can be the worst nightmare. You’ll panic once you open the door and see a flood of water all over the floor. We can’t sometimes avoid it but knowing how to take care of it right away will lessen your worries.

Common Causes of Bathroom Flooding

The causes of floods can vary, but the damage is the same. Here are a few things to consider when your bathroom floods.

  • If the water is left running in a plugged tub or sink, flooding will occur. 
  • Clogs in the drain and pipe are some common factors of flooding. An overflowing toilet is caused by flushing tissue or other objects that usually results from a clog.
  • Cracked or ruptured supply lines may cause drips that can lead to major water damage through flooding. A malfunctioning toilet float can also cause water to overflow.

 

Dealing With Bathroom Flood

Dealing with bathroom floods is necessary to prevent serious water damage from occurring in your home. Please read the following:

1. Shut off the water supply as soon as possible to stop flooding. Find the oval-shaped knobs (sink or toilet valve) that are usually behind the toilet or under the sink. If you don’t know or can’t find the water source, call a professional at once.

2. Check the electricity once you’ve stopped the water. Turn off all electricity in flooded areas of your home. If you still can’t find the main electrical supply, see sparks, or you smell gas, leave and call 911 right away to assist you.

3. Take pictures before cleaning to document the damage. You’ll be needing this in case you’ll file an insurance claim. Even minor bathroom flooding can lead to serious water damage.

4. Remove standing water by using old towels then finish it with mopping.

5. Open the windows and door when cleaning. You can also use fans or a dehumidifier as part of the drying process.

6. Scrubbing and disinfecting is necessary for the cleaning process to prevent mold growth aside from killing germs.

 

Preparation Can Save

Prevention is always the best plan of action in everything especially when it comes to plumbing and water damage issues. A few reminders include the following:

1.) Record the contact numbers of professionals and have them on-hand in case of emergencies. 

2.) Know the location of the main electrical supply or breaker and the water shut-off valves in your home. 

This will help you prepare in the middle of possible danger and disaster. This will also prevent you from costly household hazards.

 

Problem With Bathroom Flooding?

Let our expert team at Superior Restoration assist you with your concerns.

Avoid nightmares of bathroom flooding and water damage issues by calling our local office today, Water Damage Murrieta. We respond immediately and open for 24 hours.

How Fast Can Water Damage Ruin Your Property

How Fast Can Water Damage Ruin Your Property

Water damage is one of the most common issues homeowners face. But, because of its destructive and frightening effects, it should not be taken lightly. The clean water source of water damage worsens over time and can cause severe destruction to your home or business. Read on to how fast water damage can ruin your property. 

 

How Fast Can Water Damage Ruin Your Property

When it comes to water damage, time does not heal all wounds. The longer water stays in your property, the more damage there will be. Category 1 or clean water source will eventually become contaminated and can pose risks not only to your home but also to the health conditions of your family. Thus, it is necessary to take immediate actions to prevent extra damage and the chance for mold growth.

 

Minutes To Hours

Water can spread immediately to other areas of your home and can damage the furniture, walls, and flooring. Stains and discoloration can be a problem, especially for furniture that is made of wood and metal and also the carpet. Those made of paper will more likely to swell and rip and can’t be restored.

Hours To Days

The integrity of the furniture will continuously swell and decline. The water will also start to seep through the walls and other building materials and produce a musty smell.

Be aware that at the start, water damage involving clean water may rapidly turn to gray water. When clean water gets in contact with contaminated materials and surfaces, it will start to disintegrate and dissolve. If this happens, contaminants are released over time and will turn water from clean to gray category.

Days To Weeks

When clean water turns to gray water, it can lead to mold growth along with a strong musty smell, affecting the indoor air quality. Deterioration of drywall, furniture, and other porous material will continue to happen as well as malfunction of electronic components.

Weeks To Months

The gray water will completely turn to black water as chemicals and other contaminants from the furniture and other building materials dissolve in water. This category poses extreme health risks because of microorganisms and bacteria that can lead to water contamination. In addition, destruction and discoloration will compromise the materials of the building and its contents.

Spores from molds and mildews will continue to proliferate and will affect the quality of indoor air. Proper Personal Protection Equipment is a must when entering the contaminated place or area.

 

Maintain Your Home’s Value

Furthermore, there’s a significant loss of value for your property if your home is flooded because of natural disasters. Be it a flood or a minor leakage that results in serious damages if it’s not promptly addressed. Time is so important when water damage hits your home.

 

For Water Damage Restoration Services, Call A Professional

The effects of water damage can be detrimental to your health and can deteriorate the structural integrity of your home and property. It is best that your house is taken care of by a water restoration specialist company like Superior Restoration. The quicker you address water damage issues, the better and easier the recovery process is going to be.

We’ll be glad to assist you 24 hours a day, 7 days a week. Please don’t hesitate to call our local office, Water Damage Murrieta.

 

How To Prevent Winter Water Damage At Home

How To Prevent Winter Water Damage At Home

Winter is the perfect time to get snuggly warm and comfortable and enjoy the magnificence of the season. However, when the temperature is below the freezing point, there are susceptible areas of your property that are subject to potential problems. Winter can stretch your home to its limits. There’s no escape from it even from the pipes in your kitchen or bathroom to your concrete driveway. Every homeowner will have to fix it when springtime comes or further damage will havoc your house due to water damage. Learn the ways on how to prevent winter water damage in this article. 

 

How To Prevent Winter Water Damage

Winter in Murrieta will be cooler and drier than normal this year. According to WeatherSpark, the cool season lasts for 4 months, from November 23 to March 22, with an average daily high temperature below 69°F. The winter season can start to ruin your home. Homeowners should be keen on preventing future problems caused by winter. Below are some common problems and some tips on how to prevent them:

1.​ Frozen pipes

Frozen pipes that are in badly insulated areas of your home will usually result in leaks and can cost a lot to fix. Many homes suffer grave damage​ due to frozen pipes that burst and cause damage to floors, walls, and even furniture. To prevent frozen pipes, allow warmer air to circulate by opening kitchen and bathroom cabinet doors. Also, allowing cold water to drip from the faucets helps prevent the pipes from freezing.

The thermostat should be set to the same temperature the whole day. The heating costs may increase, but pipes will be less likely to freeze and burst.

2.​ Ice dams and leaks on the roof

Small openings between roofing materials can create bigger problems in the winter especially in extreme temperatures that can cause expansion and contraction. To prevent an ice dam from forming, make sure that any gaps in the roof or attic that permit hot air to escape from your home are sealed and tightly closed. When the weather is warm, watch out for water stains, missing caulk, loose shingles, or nails that extend into an attic space. Also, cleaning gutters and breaking up piles of ice that start to form on your roof will help prevent ice dams.

3.​ Mold Appearance

Possible mold growth can be seen near insulated vents in rooms, bathrooms, laundry rooms, or exterior walls, causing extensive damage to drywall and ceilings. Using a dehumidifier in problem areas of your house, as well as removing carpet from areas that are moist or humid can prevent mold from infesting your home. Also, checking for early signs of mold growth in your home can save you a lot of headaches.

4. Falling tree branches

Winter storms, strong winds, and ice storms can make the branches of trees, like the white pine, break and fall causing damage to your home. Experts suggest cutting and removing overhanging branches that could damage your home once a tree falls. Another solution would be bracing tree trunks with cables fasten to stakes around the tree.

5. Issues on chimneys

Creosote starts to form inside your chimney when the temperature is low. According to The Chimney Safety Institute of America, creosote is formed when smoke, water vapor, gases, wood particles that are unburned, hydrocarbon, tar fog, and different minerals exit and flow up into the cooler chimney. This substance is exceedingly flammable and if no proper chimney maintenance, it could result in a chimney fire. Check the outer part of your chimney for any warping, cracks, or discoloration from smoke before winter arrives. Your chimney should be inspected and repaired on a regular basis to prevent the fire from wrecking your home.

Other Safety Tips

  • Consider purchasing sewage back-up coverage due to heavy rains and melting snow that can overload the stormwater system. This can cause sewage or water to back up into the home.
  • Annually check the water supply lines for leaks. Examples of appliances that can leak are washing machines, refrigerators, water heaters, etc. 
  • Detach or disconnect outdoor hoses when not in use. This will create an obstruction that can cause backflow and will prevent water from freezing.
  • When a water problem occurs, place water leak detectors near water-bearing fixtures, beneath or at the back of the pipes, and on sump pumps.

 

Professional Water Damage By Superior Restoration

Following the tips above can help you protect your property and prevent water damage in winter.

Contact a professional water damage restoration company to ease your worries this winter! Our staff, with superb expertise, will help you quickly return your home to its pre-damaged condition.  Please don’t hesitate to call Water Damage Murrieta, we respond immediately and open for 24 hours.