Learn 5 Steps on How to Get Mold Out of Clothes

Learn 5 Steps on How to Get Mold Out of Clothes

Mold on clothes can be a source of stress in the home. Mold stains can be tough to take out from clothes so getting rid of them quickly is necessary. Because the longer mold is left on clothes, the more difficult it will be to remove. 

When mold eats organic material such as cotton clothes, it will destroy the material slowly. Continue reading and learn a few tips on how to get mold out of clothes.

 

How to Get Rid of Mold on Clothes

Check the following steps on how to get mold out of clothes:

1. Always check your clothes/garment care labels. 

Follow the manufacturer’s instructions, especially when it comes to washing and drying. Follow the suggested water temperature for the garment and how it should be dried, too.

2. Use a mold stain remover or scrub it off using a toothbrush.

Using the products that will be tackled below, just apply the solution to the mold stain. If the fabric is tough, such as cotton or denim, gently scrub off the mold with a clean toothbrush and the solution of your choice. Be extra cautious not to damage the fabric in the process.

3. Pre-soaking or drying in the sun is necessary.

 Depending on the type of fabric, drying in the sun is effective in removing mold stains and helps to kill mold spores in the fabric. However, sunlight has a natural bleaching effect which can fade colors and damage fabrics that are delicate.

 Pre-soaking the mold-stained fabric/garment in one of the suggested solutions below for up to an hour can be a solution for delicate garments.

4. Washing your clothes/garments in hot water can kill mold and mildew.

 Hot water is effective not only at getting rid of allergens and bacteria but killing mold spores, too. But follow the care label’s instructions for the recommended and safest temperature to wash your clothing. If your clothing or fabric can’t be washed, you can take them to the dry cleaner.

5. Give a final hang-dry of your clothing in the sun. 

For the remaining mold stains, you may repeat some of the previous steps. Drying in the sun again will help zap any remaining mold.

 

Choosing the Right Product 

Now that you know how to get mold out of clothes, choose the most appropriate product below for your clothes. Make sure to test it on a concealed part of the fabric or clothes first and check the safety precautions recommended on the product’s label.   

  • Soap/laundry detergent – In bar, powder, or liquid form, you can directly rub in and rinse out with water. Then dry in the sun. 
  • Bleach – Chlorine bleach is effective at killing mold, but it will also fade any colored fabric/clothes.  
  • White Vinegar – Diluted vinegar can be applied directly to the mold stain. You can also pre-soak the clothing in a pail of water mixed with a cup of vinegar. In addition, you can also add 1-2 cups of vinegar to your washing machine per cycle. This can kill any moldy smells and mildew smells not only in clothes but in your home as well.  
  • Baking soda You can use it to wash white shirts and effectively deal with mold stains. Mix 1/4 cup baking soda with water to form a paste. Apply the paste to any mold patches. Then scrub it with a toothbrush and rinse with hot water.
  • Hydrogen Peroxide – To make a solution, combine 1 part 20% hydrogen peroxide with 4 parts water. This should only be used on organic fabrics such as cotton, linen, etc. 
  • Borax – Mix a half cup of borax with hot water according to instructions. Then add the solution directly into your washing machine, and wash the clothes as normal.

 The solutions suggested above are good for eliminating mold not only in your clothes but in other areas of your home as well such as in your bathroom, basement, etc. 

Prevent Mold on Clothes 

Avoid mold in the first place. Let’s jump in for some tips. 

1. Dry your clothes quickly. 

 Take your clothes out of your washer right away and dry them in a dryer or outside. Mold is more likely to grow in moist fabric or clothing.

2. Prepare a mold prevention spray.

You can spritz your clothes with vinegar spray, baking soda solution, or any natural mold remover of your choice every 2 weeks. This can prevent musty smelling of any clothing or clothes, thus leaving them smelling fresh. 

3. Maintain moisture levels at their minimum.

Mold in clothes can occur frequently especially if the humidity level in your home is 60% or more. Thus, maintaining low levels of moisture is key when it comes to prevention. Using a dehumidifier is an efficient way of controlling the levels of humidity. 

4. Maintain good ventilation in your home and closets.

Let fresh air circulate inside your home by opening windows and turning on fans. Close windows on rainy days to keep off humidity.

5. Check HVAC filters.

Screens are usually found in any ventilation, cooling, or heating system. So it is necessary to change the filter every one to three months to prevent mold growth and allergens.

Contact Professionals for Mold Remediation Services

The smell of mold on clothes can easily spread to other unaffected clothing items and eventually spread to your property. Mold spores are airborne and can easily proliferate to different areas and materials in your home. 

How to get mold out of clothes right away is very important to prevent damage and health issues in the future. Allow Superior Restoration to take care of the job. We offer professional mold remediation services.

Contact our local office, Water Damage Murrieta. We also provide services for water damage and fire damage restoration. We are available 24/7.                                                                                                                                                                               

7 Tips To Remove and Prevent Mold On Bathroom Ceiling

7 Tips To Remove and Prevent Mold On Bathroom Ceiling

Most homeowners usually give the least importance to cleaning bathroom ceilings. It is often ignored because a typical ceiling is hard to reach for the average American. As a matter of fact, the ceiling can be a breeding ground for dirt, debris, insects, and germs. And it’s a perfect place for mold growth due to excessive moisture in the bathroom.

 Like any other part of the house, your bathroom ceiling also needs love and care to look its best. Thus, cleaning and prevention of mold on the bathroom ceiling are necessary so you and your loved ones can breathe easier when you are home.

 

Why does mold develop on your bathroom ceiling?

 Bathroom mold issues and moisture usually occur on the ceiling due to the following reasons: 

a.) Humidity issues happen when warm, dampened air reacts with a cool ceiling causing condensation and mold growth. 

b.) Liquid moisture issues are due to direct exposure to liquid/water such as roof leaks, plumbing failures, etc.

 

How To Prevent and Remove Mold on Bathroom Ceiling

The bathroom ceiling is perhaps one of the most susceptible to the growth of fungus such as mold. Due to repeated exposure to water and humidity every day, it is an ideal environment for mold to grow and thrive. Mold on your bathroom ceiling poses serious health risks to you and your family especially if not taken care of immediately. 

According to EPA, you can do cleaning alone as long as the affected area is less than 9 square feet area. Bigger than that, it is best to contact trained professionals to help you out. Otherwise, consider the following tips to remove the mold yourself and how to prevent it.

1. Always wear protective gear

The first thing you should do before doing any cleanup is putting on your mask, gloves, and goggles. Mold and cleaners can cause health problems if inhaled so make sure you protect yourself.

2. Identify the cause

Pull back the insulation and check for mold problems. Leaks cause water damage particularly roof leaks so fix them as soon as possible.

3. Prepare your preferred cleaner

You can choose from a variety of mold-killing products in the market or natural homemade mold-busting solutions. 

Bleach: Put the mixture ( 25% bleach and 75% water) in a spray bottle. Spray directly onto the surface that contains mold. Let it soak for 10-15 minutes then scrub the molded area lightly with a scrub brush.

Hydrogen Peroxide: To clean thoroughly, spray the affected area and let it sit for 10-15 minutes. Scrub the area then rinse it with water. Repeat if necessary.

Vinegar: Spray the area and let it sit for at least 15 minutes or up to one hour. Then scrub the area then rinse it with water.

Baking Soda: Add 1 teaspoon to a tablespoon of baking soda to an empty spray bottle. Fill the bottle with ¾  of hot water then shake to dissolve. Spray the area and scrub to clean the mold then, rinse with clean water.

4. Insulate the ceiling

Mold on your bathroom ceiling usually happens due to changes in temperature. The ceiling’s cool parts encourage condensation, so adding layers of insulation is helpful. This makes the surface of the ceiling warmer and will lower the risk of mold growth. 

 If you know how to insulate your bathroom, you can make it a DIY project. You can insulate the ceiling using fiberglass which is a good option.

5. Install bathroom fans

Oftentimes, mold on bathroom ceilings is caused by humidity. Especially if your bathroom doesn’t have a window, an exhaust fan or a vent fan is necessary. In addition, mounting a bathroom or ventilation fan is very helpful to reduce mold. 

6. Invest in a dehumidifier

Excessive moisture can lead to more mold spores spread in the bathroom. Purchasing your own dehumidifier is a big help because it lowers the moisture content in the bathroom. Buying a specific model for the bathroom means that it has concealed wiring to prevent the risk of fire. If you are concerned with saving and conserving electricity, you can set the dehumidifier on a timer. 

7. Paint to cover

Mold on bathroom ceilings may leave marks and stains even after removing them. You can use mold-resistant paint to cover the stains but be sure to check that all the mold is gone. Never paint over existing mold because this will just cover the mold and allow mold growth behind the paint.

 Mold Remediation By Superior Restoration

Still, upset with mold on your bathroom ceiling? If you have done everything and still think your cleaning efforts weren’t successful, depend on the professional remediation team. Our qualified technicians have the right tools for removing black mold or any type of mold on the ceiling quickly.

Please don’t hesitate to contact Water Damage Murrieta, today! We are open for 24 hours, 7 days a week to better serve you.

 

Unforeseen Perils Of A Leaky Roof

Unforeseen Perils Of A Leaky Roof

When your roof sustains water damage, the water slowly flows down from the attic to the foundation of the house. This will risk the structural integrity of your home. This can also pose more safety risks and health menace to the household.  Examples of damages from a leaky roof include a grave fire hazard from shorted electrical wiring and the possibility of mold growth. 

 

Leaky Roof Can Lead To Water Damage

Possible problems must be identified as soon as they become apparent, otherwise, minor leaks may not be recognized at once.

Here are some of the less-evident ways a leaky roof can damage your home.

 

1. Mold and Mildew Build-up

Over a long period of time, one of the most serious consequences of a leaky roof is mold and mildew growth. Mold can spread throughout the home’s structure, to the HVAC system and then to the rest of the house through the vents where it can attack and occupy furniture, carpets, and even clothing. Black mold is the most common type resulting from chronic water intrusion. Black or dark patches that resemble a stain are the first signs of mold or mildew infestation. If you found these stains, it is important to locate their cause. A strong, musty odor coming out from the attic is also a key that there is water inside.

 

  • Health Concerns From Mold

Mold can cause harm to the home and health problems of the residents. According to the U.S. Environmental Protection Agency, mold and mildew can lead to serious health issues, especially for those with high sensitivity, including nasal congestion, rhinitis, inflammations, and asthma. Mold spores continue to be produced once it’s present and will lead to allergic reactions, asthmatic symptoms, and more serious health problems.

2. Attic and Ceiling Damage

The first, existing dangers of a leaky roof are damage to the attic area and items stored there. If there is a huge size of the leak or if there is no attic, it will damage the interior ceiling. Affected ceiling paint will darken and ceiling plaster may bubble and expand. The leaking water also will damage paint and plaster on nearby walls. Damage on ceiling-mounted lights and fans can be expected, too.

3. Increased Utility Bills And Wasted Energy

Another side effect of a leaking roof is high or increased utility bills. Water intrusion is detrimental to the insulation in the attic area. If a roof leak repair is put off for a long time, chronic water intrusion will deplete the insulation significantly and your home will lose hot and cool air, resulting in higher utility bills.

4. Structural Integrity Damage

The most evident consequence of a leaking roof is the damaged rafters, ceiling joists, wall framing, and even fascia boards and exterior trim. They can become victims of water intrusion. Chronic roof leaks lead to deterioration of wood. Weakened, rotten roof framing causes serious problems that require assistance from a professional. 

5. Other Hazards From Water Damage

 

  • Fire Hazard

Long-term leaking may eventually cause electrical problems. If there is electrical wiring present in an attic or ceiling, a leaky roof could pose a fire threat from shorted wires. It is important to turn off electricity to the affected area and have an electrician examine it.

  • Slip and Fall Hazard

A severely leaking roof can cause water to puddle on the floor. This may not seem like a huge risk, but if you have an active family, and especially if you have children who like to run, you need to mop up the water to prevent human slips. Contaminants on the floor, including water, are the leading cause of slips and falls, according to research by the National Institute for Occupational Safety and Health (NIOSH).

 

Seek Professional Help

Our full team at Superior Restoration will be by your side to help you and ease your burden with water damage problems. Please don’t hesitate to contact our local office, Water Damage Murrieta. We offer 24/7 emergency service. Call us today to know more about our services.

Threats of untreated water damage

9 Threats Of Untreated Water Damage To Your Home

We don’t really think how catastrophic water is until either we find ourselves paying for costly repairs or starting to lose our used to be well-built home.

Water damage, even if it is caused by just a small amount of water, can be very devastating. The small leak that you might be seeing now can pool down and become a major problem in the near future. The result could be more harmful and pricey. 

Exposing your home to water damage for a long time can cause it to be inhabitable or irreparable. Below are the threats of untreated water damage. 

1. Water Damage Can Depreciate The Value of your home 

Water damage can be an unsightly decoration to your home and it is always difficult to cover up. Untreated water damage can leave permanent stains to your walls and floors. Painting the stains won’t totally remove signs of water damage. An inspector can easily identify the damage that was not addressed. As a result, potential buyers will either consider moving to another option or offer you lesser money for your property.   

2. Water Weakens Wooden Floors and Walls 

Wood is naturally absorbent. Even a small amount of water can make its way to seep into the entire length of the wood. The longer you let water sit in the wood, the weaker it becomes, causing your floors and walls to warp and buckle. And in the long run, it can compromise the structural integrity of your home.

3. Water Damage Can Ruin Your Electrical System

You probably have heard that water and electricity don’t go along well together. Water can cause your electricity to short and can damage your circuits. The longer the water sits, the higher the chances of having severe damage to your electricity, making it unsafe. It is certainly not a problem you can fix on your own, so it is best to call in professionals to thoroughly check and fix any electrical damage.

4. Water Can Ruin Your drywall 

Untreated water damage can cause your drywall to become irreparably ruined.  Exposure to water for an extended period of time can cause your drywall to warp or deform and become a perfect place for mold growth. As a result, the water damaged drywall needs to be cut out and replaced. 

5. Water Can Corrode Pipes

When pipes get corroded, they tend to develop a leak, which could cause a more severe problem. Water damaged pipes, when untreated for a longer time, can lead you to more costly water damage restoration services. 

6. Dripping Water Can Lead To Holes In Your Concrete

A small drip might be considered as a minor problem. But a small drip, if untreated for a longer time, can eat through the concrete, affecting your home’s foundation and leaving it structurally unsound.

7. Water Can Damage Metal Structures, Trusses And Insulation

This type of water damage doesn’t necessarily need flowing or dripping water. Standing water, if left untreated, can be the threat of severe damage and can weaken the framework of your home.  Water damage metal structures and trusses can cause your home to be physically weaker while water-damaged insulation can cause mold growth. Even more, damage to insulation can increase your electricity bills. 

8. Break Down Of Carpet

Carpets are made durable, but leaving them with water can cause break down. If water sits in your carpet for too long, it can warp decay and loosen your carpet padding and subflooring. Water damage on your carpet can become a lasting problem.

9. Health Hazards

Flood water contains bacteria, pathogens, and other contaminants that can be harmful to you, your family, and your belongings. Chemicals, contaminants, and toxins can still linger even after the floodwater has been sucked up by a shop vac. 

Your water damage home, if left untreated, can be a perfect home for mold, bugs, and fungus.  The damp and humid area is the perfect condition for these harmful insects to grow. These elements in your home can be the cause of unexplainable illnesses and allergies. 

Call Superior Restoration

It is definite that leaving water damage untreated can harm you and your property. Not only that, but it can also cause you to spend a lot of money on repairs. There is a big difference between the cost of repair on water damage that was addressed right after it happened and to the water damage that is left untreated for a longer time. If you suspect water damage in your home or if you see signs of water damage, contact your local water damage restoration company. It is always best to have this damage repaired by professionals to make sure that the damage is fully fixed. Contact Superior Restoration today. We are a team of experts, ready to restore your home to its pre-disaster condition.

Mold and water damage

The toxic fungus that is black mold can be potentially deadly to anyone who is susceptible to it. It travels easily on the air and once inhaled into someone’s lungs it can cause severe breathing issues, blood-borne toxicity and other physical problems that could be fatal if not treated properly.

Anyone with an already weakened immune system should stay well away from mold and under no circumstances should attempt to clean it up. A professional mold remediation company is your best bet to make sure that you have gotten rid of all the mold.

These are a few things you should know about testing your home and office for this deadly mold.

  • Signs of black mold
    If you have a persistent water leak behind a wall or you detect a musty smell and cannot find where its coming from you may want to call in a professional to test for black mold. If you can actually see the mold do not approach it and by no means breathe it in.
  • Home testing kits
    You can purchase a home testing kit at stores such as home depot. Some will give you the result right then and there and some of them will ask you to mail in the sample that you’ve taken and the result will come afterwards. It’s worth noting that these kits are easy to use but not as accurate as professional testing.
  • Professional inspection
    While you can do it yourself it is highly recommended that professional mold removal experts have a look at your home or office for the presence of black mold. They have training and experience on their side when it comes to detecting mold.

Of all the rooms in your home the bathroom has the most contact with water. Its hot and humid and an inadvertent spill can cause water to seep everywhere. Its important to clean up any excess water right away as mold can form very quickly and if found you should contact a water damage restoration company right away. Follow these simple steps for finding water damage in and mold in your bathrooms

  • Check areas that are commonly damp
    Areas such as under the sink, the corners of bathtubs and showers, shower curtains and the caulking in a tiled floor are susceptible to water damage. If you have had water damage previously be extra vigilant.
  • Checking your flooring
    Tiled, carpeted and wooden floors are all in danger of water damage. If your feel your floor lifting under your feet or feel that it is particularly damp it is time to call in a professional. Also look out for a sour rotting smell.
  • Check your ceilings and walls
    Small corners and crevices are perfect places for mold to form. Check the comers of your bathroom to make sure none has begun to grow.
  • Use your nose
    Never ignore any smells like musty, rotting, earthy and sour smells in your bathroom. If a smell like this is present then it is a sign that water damage has lead to mold and the longer you leave it the worse it will get.
  • Check again!
    Don t just look once every 6 months! If you suspect water damage then you should check for it regularly. You should look very keenly at any area that has suffered damage before as water may have got at it again.