Learn 5 Steps on How to Get Mold Out of Clothes

Learn 5 Steps on How to Get Mold Out of Clothes

Mold on clothes can be a source of stress in the home. Mold stains can be tough to take out from clothes so getting rid of them quickly is necessary. Because the longer mold is left on clothes, the more difficult it will be to remove. 

When mold eats organic material such as cotton clothes, it will destroy the material slowly. Continue reading and learn a few tips on how to get mold out of clothes.

 

How to Get Rid of Mold on Clothes

Check the following steps on how to get mold out of clothes:

1. Always check your clothes/garment care labels. 

Follow the manufacturer’s instructions, especially when it comes to washing and drying. Follow the suggested water temperature for the garment and how it should be dried, too.

2. Use a mold stain remover or scrub it off using a toothbrush.

Using the products that will be tackled below, just apply the solution to the mold stain. If the fabric is tough, such as cotton or denim, gently scrub off the mold with a clean toothbrush and the solution of your choice. Be extra cautious not to damage the fabric in the process.

3. Pre-soaking or drying in the sun is necessary.

 Depending on the type of fabric, drying in the sun is effective in removing mold stains and helps to kill mold spores in the fabric. However, sunlight has a natural bleaching effect which can fade colors and damage fabrics that are delicate.

 Pre-soaking the mold-stained fabric/garment in one of the suggested solutions below for up to an hour can be a solution for delicate garments.

4. Washing your clothes/garments in hot water can kill mold and mildew.

 Hot water is effective not only at getting rid of allergens and bacteria but killing mold spores, too. But follow the care label’s instructions for the recommended and safest temperature to wash your clothing. If your clothing or fabric can’t be washed, you can take them to the dry cleaner.

5. Give a final hang-dry of your clothing in the sun. 

For the remaining mold stains, you may repeat some of the previous steps. Drying in the sun again will help zap any remaining mold.

 

Choosing the Right Product 

Now that you know how to get mold out of clothes, choose the most appropriate product below for your clothes. Make sure to test it on a concealed part of the fabric or clothes first and check the safety precautions recommended on the product’s label.   

  • Soap/laundry detergent – In bar, powder, or liquid form, you can directly rub in and rinse out with water. Then dry in the sun. 
  • Bleach – Chlorine bleach is effective at killing mold, but it will also fade any colored fabric/clothes.  
  • White Vinegar – Diluted vinegar can be applied directly to the mold stain. You can also pre-soak the clothing in a pail of water mixed with a cup of vinegar. In addition, you can also add 1-2 cups of vinegar to your washing machine per cycle. This can kill any moldy smells and mildew smells not only in clothes but in your home as well.  
  • Baking soda You can use it to wash white shirts and effectively deal with mold stains. Mix 1/4 cup baking soda with water to form a paste. Apply the paste to any mold patches. Then scrub it with a toothbrush and rinse with hot water.
  • Hydrogen Peroxide – To make a solution, combine 1 part 20% hydrogen peroxide with 4 parts water. This should only be used on organic fabrics such as cotton, linen, etc. 
  • Borax – Mix a half cup of borax with hot water according to instructions. Then add the solution directly into your washing machine, and wash the clothes as normal.

 The solutions suggested above are good for eliminating mold not only in your clothes but in other areas of your home as well such as in your bathroom, basement, etc. 

Prevent Mold on Clothes 

Avoid mold in the first place. Let’s jump in for some tips. 

1. Dry your clothes quickly. 

 Take your clothes out of your washer right away and dry them in a dryer or outside. Mold is more likely to grow in moist fabric or clothing.

2. Prepare a mold prevention spray.

You can spritz your clothes with vinegar spray, baking soda solution, or any natural mold remover of your choice every 2 weeks. This can prevent musty smelling of any clothing or clothes, thus leaving them smelling fresh. 

3. Maintain moisture levels at their minimum.

Mold in clothes can occur frequently especially if the humidity level in your home is 60% or more. Thus, maintaining low levels of moisture is key when it comes to prevention. Using a dehumidifier is an efficient way of controlling the levels of humidity. 

4. Maintain good ventilation in your home and closets.

Let fresh air circulate inside your home by opening windows and turning on fans. Close windows on rainy days to keep off humidity.

5. Check HVAC filters.

Screens are usually found in any ventilation, cooling, or heating system. So it is necessary to change the filter every one to three months to prevent mold growth and allergens.

Contact Professionals for Mold Remediation Services

The smell of mold on clothes can easily spread to other unaffected clothing items and eventually spread to your property. Mold spores are airborne and can easily proliferate to different areas and materials in your home. 

How to get mold out of clothes right away is very important to prevent damage and health issues in the future. Allow Superior Restoration to take care of the job. We offer professional mold remediation services.

Contact our local office, Water Damage Murrieta. We also provide services for water damage and fire damage restoration. We are available 24/7.                                                                                                                                                                               

7 Tips To Remove and Prevent Mold On Bathroom Ceiling

7 Tips To Remove and Prevent Mold On Bathroom Ceiling

Most homeowners usually give the least importance to cleaning bathroom ceilings. It is often ignored because a typical ceiling is hard to reach for the average American. As a matter of fact, the ceiling can be a breeding ground for dirt, debris, insects, and germs. And it’s a perfect place for mold growth due to excessive moisture in the bathroom.

 Like any other part of the house, your bathroom ceiling also needs love and care to look its best. Thus, cleaning and prevention of mold on the bathroom ceiling are necessary so you and your loved ones can breathe easier when you are home.

 

Why does mold develop on your bathroom ceiling?

 Bathroom mold issues and moisture usually occur on the ceiling due to the following reasons: 

a.) Humidity issues happen when warm, dampened air reacts with a cool ceiling causing condensation and mold growth. 

b.) Liquid moisture issues are due to direct exposure to liquid/water such as roof leaks, plumbing failures, etc.

 

How To Prevent and Remove Mold on Bathroom Ceiling

The bathroom ceiling is perhaps one of the most susceptible to the growth of fungus such as mold. Due to repeated exposure to water and humidity every day, it is an ideal environment for mold to grow and thrive. Mold on your bathroom ceiling poses serious health risks to you and your family especially if not taken care of immediately. 

According to EPA, you can do cleaning alone as long as the affected area is less than 9 square feet area. Bigger than that, it is best to contact trained professionals to help you out. Otherwise, consider the following tips to remove the mold yourself and how to prevent it.

1. Always wear protective gear

The first thing you should do before doing any cleanup is putting on your mask, gloves, and goggles. Mold and cleaners can cause health problems if inhaled so make sure you protect yourself.

2. Identify the cause

Pull back the insulation and check for mold problems. Leaks cause water damage particularly roof leaks so fix them as soon as possible.

3. Prepare your preferred cleaner

You can choose from a variety of mold-killing products in the market or natural homemade mold-busting solutions. 

Bleach: Put the mixture ( 25% bleach and 75% water) in a spray bottle. Spray directly onto the surface that contains mold. Let it soak for 10-15 minutes then scrub the molded area lightly with a scrub brush.

Hydrogen Peroxide: To clean thoroughly, spray the affected area and let it sit for 10-15 minutes. Scrub the area then rinse it with water. Repeat if necessary.

Vinegar: Spray the area and let it sit for at least 15 minutes or up to one hour. Then scrub the area then rinse it with water.

Baking Soda: Add 1 teaspoon to a tablespoon of baking soda to an empty spray bottle. Fill the bottle with ¾  of hot water then shake to dissolve. Spray the area and scrub to clean the mold then, rinse with clean water.

4. Insulate the ceiling

Mold on your bathroom ceiling usually happens due to changes in temperature. The ceiling’s cool parts encourage condensation, so adding layers of insulation is helpful. This makes the surface of the ceiling warmer and will lower the risk of mold growth. 

 If you know how to insulate your bathroom, you can make it a DIY project. You can insulate the ceiling using fiberglass which is a good option.

5. Install bathroom fans

Oftentimes, mold on bathroom ceilings is caused by humidity. Especially if your bathroom doesn’t have a window, an exhaust fan or a vent fan is necessary. In addition, mounting a bathroom or ventilation fan is very helpful to reduce mold. 

6. Invest in a dehumidifier

Excessive moisture can lead to more mold spores spread in the bathroom. Purchasing your own dehumidifier is a big help because it lowers the moisture content in the bathroom. Buying a specific model for the bathroom means that it has concealed wiring to prevent the risk of fire. If you are concerned with saving and conserving electricity, you can set the dehumidifier on a timer. 

7. Paint to cover

Mold on bathroom ceilings may leave marks and stains even after removing them. You can use mold-resistant paint to cover the stains but be sure to check that all the mold is gone. Never paint over existing mold because this will just cover the mold and allow mold growth behind the paint.

 Mold Remediation By Superior Restoration

Still, upset with mold on your bathroom ceiling? If you have done everything and still think your cleaning efforts weren’t successful, depend on the professional remediation team. Our qualified technicians have the right tools for removing black mold or any type of mold on the ceiling quickly.

Please don’t hesitate to contact Water Damage Murrieta, today! We are open for 24 hours, 7 days a week to better serve you.

 

Water Damage Cleanup: How Professionals Do It

When a flood or burst pipe disaster damages your home, you need to act quickly and hire certified professionals for the cleanup. Even when soaked materials are removed, excess moisture, accumulated in your home, can lead to lingering problems. The damage can become worse if water has come in with a contaminated source or flood.

Only professional water damage restoration crew knows how to remove excess moisture and mitigate the risks. This article highlights the professionals’ way of handling water damage cleanup to give you an idea about how complex the task is and why it should always be left to the professionals.

Assessing the Extent of Damage

The professionals from water damage service will first discover the source of the moisture and assess the extent of the damage. After that, they will isolate the area and remove all the standing water. If several inches of water are present like a flooded basement from a burst pipe, commercial pumping systems will be used to dry the space as soon as possible.

Disposing the Materials

After removing the standing water, the technicians will examine the area and dispose away the materials that have suffered damaged. Typically, contaminated and wet materials are eliminated. Baseboards, carpets, drywall portions, plywood, particle board and casing usually are not able to survive prolonged exposure to moisture, especially when they have been soaked for over 24 hours.

Wick off the Moisture

After the damaged materials have been removed, the only materials that are left are those which can be dried and saved. Therefore, the restoration professionals then quickly try to wick off as much moisture as possible.

Usually this process involves the use of high volume dehumidifiers and commercial air movers. This equipment can restore the building to its normal moisture level within a few days.

Air movers and dehumidifiers normally work well enough, but in some particular cases, restoration crew uses special equipment such as heat injectors to dry out the places that are hard to reach. A moisture meter with probes that can be inserted into materials is used by professional technicians to monitor the moisture content level.

Once the building has been returned to its original moisture content level, the restoration crew will take apart the cleanup area and properly put all the furniture the way it was before the restoration.

Address Microbial Growth

Addressing microbial growth is an important part of the water damage cleanup and the technicians who perform restoration will also destroy molds as well as other microorganisms. Special agents are used for this purpose to clean up the areas which may harbor the pathogens.

Once a water damage restoration company is finished with the cleanup, your home will be ready to live in again. Your family won’t have to worry about any danger from harmful microorganisms.

Now that you know how professional restoration services handle water damage cleanup, you will always hire a professional water damage restoration company that can guarantee this level of service. To get in touch with the best in the industry, contact Superior Restoration as we are equipped with certified technicians who are experienced with water damage restoration and cleanup.

 

 

 

 

 

Rain proofing – a necessity rather than a luxury

It’s a fact that in California when it starts to rain people appear to go insane. Drivers forget how to drive and start acting like there are on a go-kart track. People wear the most wildly inappropriate clothing for the weather and generally act like chickens with their head cut off. One area of rain management that Californians are particularly bad at is rain the proofing their homes. It doesn’t always rain in California but when it does it’s usually quite dramatic and for homes that are not prepared it can be quite devastating in the water damage Department.

Most homes in California are designed to deal with extremes of heat rather than extremes of water. One area of concern is the caulking around windows and doors. The heat during the summer months can cause the gawking to crack and break off and during the rainy season this will allow rain directly into your home causing untold water damage. One would prevent this is of course to replace the caulking in the fall.

Another area for concern is the ceiling of your home and the roof above it. If your roof is not properly maintained land water will make its way into your home and the damage can be lasting. Though it’s difficult to identify a problem area on the roof before it rains if you see cracked or broken tiles or loose or shifted shingles those should be replaced immediately. A small amount of prevention can save you a great deal of money in the long run. If your home has become flooded you should contact a quality water damage restoration company to effect repairs.

If you are you looking to purchase a home, buy an investment property, or remodel your current property a rainy day is the best time to see any leaks or drainage issues that need to be addressed. You can check out the roof, gutters, and grade of the property. Make sure you inspect the attic especially around chimneys and vents, as these errors are particularly susceptible to water damage.

You can watch to see if the gutters are over flowing and see if the splash blacks are positioned correctly. If there are issues with water it is good to know before you purchase, rent, or remodel and the faster the problem is identified the faster it can be fixed. Storm damage, standing water, and moisture can cause mold to grow which could eventually become a health risk as well as cause further damage to sheetrock and carpet. Prolonged exposure to mold as well known to cause long lasting health issues.

If you suspect you have roof damage or defects in your home caused by water that may lead to mold the work can be started immediately after the inspection making it easy to meet a closing date. Take the opportunity to watch out on the next rainy day as itsan ideal time to inspect your home as to be accurate of the cause of leaks and trapped water. Storms, wind, and fallen limbs can cause damage that is not recognized immediately.  If the damage is beyond your capabilities to repair seek out a quality water damage restoration company to do the work for you.