hardwood floor

How To Repair Hardwood Floor Water Damage

Nowadays, most homeowners are turning to the classic and elegant look of hardwood floors. However, its only weakness is that even a small amount of clean water is enough to deal with a lot of damage. Are you one of those who have been experiencing wood floor water damage? By reading this full article, we will walk you through how to repair your water damaged wood floor.

What are the causes of hardwood floor water damage?

  1. When the temperature goes down, humidity increases. If this happens, moisture content increases and can cause your flooring to have issues. Thus, humidity has a role in damaging the wood flooring.
  2. Broken pipes or leaks cause water damage to your wood floors.
  3. Groundwater occurs when floodwater seeps into the foundation of your home.

What are the Signs of Water Damaged Wood Floors?

  • Water Stains/discoloration- stains can be dark or light and usually in the shape of uneven rings that ripples from the water source across your wood floor.
  • Buckling- this is when the floor planks are being detached from the subfloor. Excess moisture causes the floorboard to expand and can make a large hump on your floor.
  • Cupping- this happens when the edges of each board bend upward and warp out of shape. Moreover, it also makes the gaps expand between floorboards.
  • Bulging- another wood floor issue is when it bubbles outward forming a “crown-shape” on the woods. It means that more moisture is on top of the plank than the bottom part.

How do you Repair Water Damaged Wood Floor?

When dealing with water-damaged flooring, you have to respond right away to avoid more serious damage. Follow the following steps to fix a water-damaged hardwood floor.

1. Find first the root cause of water-damaged wood floors then fix the source of the problem. Issues such as leaks, overflow, water spills, or moisture level imbalance can be some of the causes of the damage. For instance, if there’s a leaky pipe, try to resolve it first as this could lead to a bigger issue. You can start the repair process once it’s repaired.

2. Get rid of excess amount of water or moisture by drying out the affected areas or parts. Consider using a wet/dry shop vacuum for efficient removal of excessive water especially if it has absorbed water deeply into the wood. You can also use mops and old towels for wiping away any excess moisture or water.

3. Treat the moldy areas of the wooden floors and check the subfloors for any signs of mold growth such as musty stains especially musty smells. You can use either natural or chemical mold killer.

4. Ventilate and completely dry the floor immediately using fans. If the humidity level is low, open all windows and doors for proper circulation of air. You can also use dehumidifiers to get rid of moisture in the room.

Warped Hardwood Floor: Repair or Replace?

For slightly warped boards, you can fix it by simply using fine-grit sandpaper to sand it down. Once the moisture on the floor has been removed, you can start sanding down the boards carefully. Placing a heavy object (e.g. furniture or dresser) on top of the wood boards can also be helpful in fixing warped hardwood floors.

However, if you start to notice buckling of your hardwood floor, you may need to remove the affected planks and replace them. For serious damage, it may be necessary to replace the damaged boards.

Seek Trusted Professionals

Wood floor water damage can really be stressful if you ignore it. If you think your home has it, check out the steps above. You can fix the problem on your own especially for minor cases of water damage. But it is still best to seek help from a licensed water damage restoration company like Superior Restoration.

Water Damage Murrieta provides excellent restoration services, a restoration company you can trust. They can restore your water-damaged hardwood floor and help you address any sources of water damage. This is to prevent extensive damage to your existing flooring.

Have a hard time with your water damaged solid hardwood floor? Please contact us today. We are available 24 hours a day, 7 days a week because we care.

Cleaning a mattress with a Vacuum

Tips To Save and Dry Your Water Damaged Mattress

When water damage hits your property be it from floodwaters or piping leakages, it doesn’t spare anything. Unfortunately, that includes your mattress! The same thing with the other household items, mattresses can also be damaged by contaminated water. Restoring it becomes quite hard especially if the mattress has been soaked for more than 24 hours. In this case, consider discarding it. However, in some conditions, saving a soaked mattress might be possible. In this article, we will go through with some helpful tips on how to dry and restore a wet mattress.


Just like your carpets and rugs, mattresses are home to many allergens, too. They provide a good place for mold and mildew to grow especially within 24 hours to 48 hours of water exposure.

So before getting into the whole repair and restoration process, try to assess first the extent of the damage. Determine whether your wet mattress is worth the effort and money that will be spent in the process. Or will it be able to accomplish the restoration task or not?

If you have a mattress that is of low quality and common, it is better to just dispose of it and buy a new one. But if your memory foam mattress is way expensive and has a sentimental value, you must go for whatever it takes to recover it from the damage.

And to help you restore the mattress, better consult with professional restoration.

How to Completely Dry a Mattress

Reconditioning and cleaning a mattress at home is extremely difficult and sometimes hard to restore. Check the following steps in trying to salvage your mattress at home:

  1. Treat the mattress right away or within 24 hours to prevent mold growth.
  2. You may want to rent a wet-dry vacuum to use on your mattress. This will help in absorbing excess liquid.
  3. Dry your wet mattress thoroughly. If the weather is fine, dry your mattress outdoors especially in direct sunlight for a few hours. You may use fans, too. This will speed up the process. You may also open windows for better air circulation.
  4. Try adding baking soda to cover your mattress before vacuuming it. This cleaning solution is effective and helps in absorbing excess moisture. Moreover, it gets rid of the musty smell and prevents mold growth.
  5. Brush off any surface soil and debris or use a nozzle vacuum cleaner. The purpose of this type of vacuum is for picking up as many different kinds of dust as possible.
  6. For dirt/water stains: use a cleaning solution such as water and a part of dish soap or any gentle cleanser.
  7. For mold stains: dip a clean cloth in an alcohol solution. (1cup alcohol:1 cup water) for mold prevention. You can also use hydrogen peroxide, white vinegar, or bleach.
  8. Wring out the cloth and wipe the mattress gently.
  9. Dry using a fan for a rapid drying process.

Box Springs

If upholstered box springs and wood frames are slightly damaged, thoroughly dry them first before replacing the mattress cover and pad. However, consider buying new boxsprings if the old ones are severely damaged.

Call Superior Restoration, Today!

Though DIY basic tips for repairing your water damaged mattress are given, it is still preferable to contact a water damage restoration company. We have teams of highly-skilled experts that can help you get your mattress completely dry!

We are always open to serving you 24/7. Call us today, Water Damage Murrieta to know more about our water damage, mold, and fire restoration services.

dishwasher leak

Why Is My Dishwasher Flooding? Causes And Tips Worth-Knowing

Just like washing machines, dishwashers make a person’s life easier. However, when you discover standing water at the bottom of the dishwasher, it becomes a burden. And if not taken care of immediately, it may lead to water damage. Dishwasher flooding is one of the most common reasons for home insurance claims.

The good thing is you need not call a repair technician right away once you experience dishwasher leaks. Since there are DIY solutions that you can do for the most common culprits of this issue. And to prevent further damage, consider consulting a water damage restoration professional.

Why is my dishwasher flooding? Keep reading to discover the common causes and how to prevent your dishwasher from leaks and flooding.

Why is your dishwasher flooding? Check out the common causes.

Unluckily, there are various reasons why your dishwasher leaks, floods, or overflows. People think small leaks through the door are not that dangerous but a dishwasher leak from the bottom can do more. It can flood your kitchen or spread to other rooms in your home. Learn the following causes and prevention to save you from serious damages.

Worn-out Seals and a Faulty Dishwasher Door Gasket

Older units of dishwashers may develop leaks due to dents, corrosion, worn-out gaskets, and seals. Over time, the latch and hinges tend to loosen which also contributes to not forming a good seal of the door.

Loose Connections, Hoses, and Valves

Hoses and connections inside the dishwasher can work loose over time. This can cause dishwasher leaks or even flood your kitchen. Make sure that you check the hoses of your dishwasher drain to see if everything is securely connected. Include the clamps that hold the hose in place on both sides.

Also, check your water inlet valve. If the valve malfunctions, it can fill the dishwasher with water especially when not in use. As a result, overflowing and flooding onto the floor will occur. Cracked hoses or any fault found with the valve, need to be replaced.

Dishwasher Detergent Issues

Certain dishwasher soap is specially formulated and intended only for dishwashers. Avoid using regular dish soaps since they make thick foam and lead to excessive suds. Even if rinsing is done before running the dishwasher, the solution can still create bubbles and put pressure against the door seal. This will eventually cause leaks and dishwasher overflow.

Clogged Drain Issue 

The bottom of your dishwasher can become clogged with food debris. These particles can block the area where the water cannot drain properly out of the dishwasher. This will lead to floods and overflow.

Float Valve/Assembly Issues

The float assembly is found inside the dishwasher tub located on the bottom. The float assembly moves upward when water enters your dishwasher then sends signals to the dishwasher valve to shut the water off. The float wears out over time and if it is stuck in the UP position, the dishwasher may overfill. This may lead to kitchen flooding.

Dishwasher Flooding: What to Do & How to Prevent It

When your unit’s leak is severe and it floods, you usually panic. Just calm down. Turn off the power to the dishwasher or shut off the circuit breaker before cleaning up. Then, mop or soak up the water with towels or you can also use a handy siphon pump.

Check your dishwasher’s drain and the drain grate or mesh that covers the drain area as well. Sometimes you can find food particles caught in the grate. Remove and clean them thoroughly with warm water and soap.

Once cleaned, check if it drains properly. If not, the hose running from the unit to the kitchen sink may need a repair or replacement. If ever your dishwasher leaks again in the future, call a plumber to examine the unit carefully.

Another important thing to check is the garbage disposal and kitchen sink for clogs, especially if the pump is clear. Since dishwashers typically drain into these areas, a clog or blockage will prevent the unit from emptying fully. This will lead to backflow, instead.

Prevention Tips for Dishwasher Flooding

After doing DIY solutions on fixing your dishwasher issues, you can now check the following tips to prevent dishwasher flooding.

  • Load your dishwasher properly so as not to block the sprayers.
  • Use the appropriate kind and amount of soap for your dishwasher.
  • Always clear out the dishwasher’s bottom after use to prevent blockages. Check for broken glasses or plates since they can also block the bottom of the dishwasher.
  • Clean the dishwasher often. Keep the filter clean as well as the seal, gasket, and sprayer nozzles at least every three months.
  • Check both the float assembly and the switch where it is connected. They may get stuck or fail which can lead to dishwasher leaks.
  • Check the drain hose and the supply line every six months.
  • Only run your dishwasher if you’re at home so you can monitor its performance.
  •  Keep an eye on your dishwasher’s water level.
  • Run water at the sink before beginning the wash cycle to optimize the cleaning performance.

Seek Help From Your Trusted Water Damage Restoration Company

Dishwasher flooding is one of the common problems of most homeowners. Ignoring even small leaks can lead to a disastrous situation. Prevent it from happening by following the tips mentioned above and calling a professional.

Superior Restoration is proud to serve as one of the leading companies for water, mold, fire, and smoke damage restoration services. We are ready to serve our residential and commercial clients 24/7. Please don’t hesitate to contact Water Damage Murrieta.


10 Helpful Tips On How To Prevent Mold In Closet

Mold is a common foe and continues to be a persistent issue of every homeowner. Unfortunately, it appears not only in your bathroom or basement but in your closet as well. Mold can affect the clothes in your closet and damage them.

Mold in small amounts is not that harmful but mold spores can easily reproduce and take over your closet. Check out the following tips on how to prevent mold in the closet to prevent significant property damage.

Signs of Mold in Closet

Custom closets provide a good environment for mold to easily develop since they are dark and enclosed. Moisture from the air and damp clothes can affect your closet and make the mold spread quickly.

If you notice any of the following symptoms, act and prevent mold in the closet right away. It’s also best to consult professional mold removal especially if mold has spread to other parts of your home.

  • An unpleasant or musty odor or smell can spread throughout your property.
  • Unpleasant stains of different colors that you can see on the walls of your closet.
  • Excessive moisture that is trapped underneath the wall’s surfaces causes paint to peel, crack, or bubble.

How to Prevent Mold in a Closet

With poor airflow, mold can be persistent in reproducing even in your closets. Getting rid of mold completely is not easy, but the Environmental Protection Agency recommends ways to prevent indoor mold. And one of the best ways you can do is to “control moisture.”

Consider the following important tips to prevent mold from growing in your closets and further damage in surrounding areas:

1. Once you begin to smell something musty in your closet or on your clothes, never ignore it.  

It’s a sign that you might have mold issues and don’t attempt to cover it with an air freshener.

2. Check your closets for water damage. 

Check water leaks particularly on the ceiling and walls. If moisture isn’t checked, it will damage your closet space.

3. Keep your closets including the items inside, clean and dry.

Make sure that your clothes or anything that you put inside your closet are clean and dry. Regularly clean your closets to prevent mold. When cleaning, remove everything in your closet so you can vacuum or wipe the dust and dirt completely.

Dry everything before putting them back. You can sometimes leave the door of your closet open for several hours to allow fresh air into the space. You can also place silica gel, washed charcoal, or baking soda in your closet since they can absorb moisture.

4. Space out your clothing for better circulation.

Allow extra space by not packing your clothes too tight together and removing things you no longer use or want. Rearranging your clean clothing for more space allows the air to circulate better.

5. Dispose of plastic bags.

Avoid storing your clothes in dry-cleaning bags or plastic. Plastic, usually with polyethylene composition can trap humidity and cause mold to grow and develop.

6. Maintain low levels of humidity.

Keep humidity in low levels like between 30 % to 50 %. Using a dehumidifier is so useful in removing excess moisture from your closets. Moreover, leaving the closet doors open for several hours can help in preventing mold in the future.

7. Always hang your clothes.

Avoid storing anything on your closet floors to prevent moisture from being trapped beneath.

8. Install a  light bulb in your closet.

This will help in burning off excess moisture and humidity in your closet. Just be sure that clothes or other flammable items are far from the light.

9. Consider replacing your old wooden closets with wire shelving.

Lack of airflow is one of the major causes for mold growth aside from humidity. Heavy shelving made from wood absorbs moisture which will cause mold on wood.

If you have wooden closet shelves with wire structures, the grid-like design allows better ventilation. Even between your hung-up clothes and folded clothes, the wire shelves often have openings along the bottom for superior circulation.

10. Spray vinegar to kill mold in your closet.

Fill a bottle with white vinegar and spray it on all surfaces of your custom closets. Spray it on the walls, clothing rods, and cabinets. Then, allow and leave the vinegar to dry. Do this method before you place all your clothes or items back in your closet.

Dealing With Mold in Your Closet 

Mold growing in your closet is annoying since it can even hide in the best-kept closets or cabinets. So if you’re still struggling with persistent mold, consider contacting our team at Superior Restoration. We have highly-trained technicians and advanced equipment that can deal with your mold issues more efficiently.

Please contact our local office Water Damage Murrieta, for mold remediation and water damage repair. We are available 24 hours a day, 7 days a week to serve you better.

damaged ceiling

Learn 10 Steps On How To Repair Water Damaged Ceiling

Water leaking from the ceiling is a common problem that you shouldn’t ignore. Once you discover drops of water coming through the ceiling, act immediately. Because if left untreated, ceiling water damage can lead not only to structural damage to your home but can also endanger your health.

Taking care of water damage as soon as it happens will prevent bigger issues in the future. Mold remediation experts at Superior Restoration will give some insights on how to repair the water damaged ceiling.

Is Water Damage Dangerous?

Yes. Water damage is not safe, be it a water stain in your ceiling or anywhere else, it can pose a threat to you and your property. Check the following number of different reasons why water damage is dangerous.

  • It could end up with mold in your home. There are different types of mold but all produce spores that could be mixed in the air and can have an impact on your health.
  • It can weaken the structural integrity of your property. If it gets into the ceiling, it can make the ceiling weaker and could cause it to collapse.

Signs of a Water Damaged Ceiling

Be it a water damaged wall or water damaged ceiling, you should learn how to identify water damage before it becomes a more serious problem. Check the following:

  • Discoloration
  • Standing or Pooling Water
  • Rusty Metal
  • Mold Growth/ Musty Smell

Before You Start Any Repairs or Cleanup

For your safety, shut off the power supply if the water is running close to any electrical wiring to avoid electric shock. Be extra careful when standing under a ceiling because it might cave in on you if it is holding too much water. It’s best to inspect the ceiling first before you enter the room to see if there are any watermarks/stains, discoloration, or a bulging ceiling.

How to Repair Water Damaged Ceiling

Check out these steps on how to repair a water damaged ceiling.

Step 1: Assess the damage and find out the extent of it.

Step 2: Try to reduce the amount of water trapped inside the ceiling. You can do this by gently poking small holes through the ceiling using a nail, ice pick, screwdriver, or knife will also do. Be careful when doing this to avoid water rushing all out and flooding the room. Also, make sure to place a bucket underneath the hole you’re making for water drip collection.

Step 3: Check the water source and the affected areas.

Once you identify the source of the water leak, fix it. If water damage is due to a leaking roof, repair the roof right away (if the weather is fine). You can fix this or remove the damaged ceiling on your own but simply call a professional for roof repair.

If it is not possible yet to seal the roof due to bad weather, cover it with a canvas or any water-proof sheeting to stop water from coming in through the hole.

Stop the supply of water if the cause is a burst pipe and call a professional plumber to help you fix the pipe.

Step 4:  Before you proceed with cleanup, spread a tarp over the furniture and the floor for protection. Get rid of all wet ceiling material such as the insulation and sheetrock. Remove all loose and peeling drywall or plaster. Dry out the ceiling as fast as you can to prevent mold and reduce damage.

You can use high-volume fans and dehumidifiers for quick drying of the ceiling and other ceiling materials like wood joists. Salvageable materials should be dried, too.

Step 5: Prepare an anti-mold solution and spray the water-damaged area.

Step 6: For minor ceiling water damage, you can use plaster or drywall mud to fix small gaps and cracks. And you can fill the small holes with joint compounds.

For gaps that are less than half an inch wide, use a putty knife or utility knife to fill the gaps and leave a smooth finish. For gaps that are wider, fill them in first and then sand them smooth.

Step 7: For major ceiling water damage, sections of the ceiling should be cut away. You can use a box cutter or a saw that is intended for drywall and make straight cuts.

Step 8: Cut a new piece of drywall. It should be smaller than the hole and then screw it into the ceiling joists. To seal the gaps, mud, and tape the joints, and smooth out the ceiling.

Step 9: For plaster, replace the backing material or the lathe then apply the plaster in thin layers. Allow it to dry and continue to apply layers until the existing texture matches the new section.

Step 10: Paint the damaged part with a sealing primer once the plaster or mud is dry. But before applying the topcoat, it is necessary to try at least two coats of primer.

Professional Water Damage Restoration Services

You don’t know when leaks will happen, you don’t even know when water damage has started. But there is one thing that you can be sure of—the skilled professionals at Superior Restoration will be there for you especially in emergency situations.

We have advanced tools and equipment to make your home dry and safe again. Please contact Water Damage Murrieta, we specialize in water damage remediation and emergency water extraction services. You can rely on us 24/7/365.


Learn 5 Steps on How to Get Mold Out of Clothes

Mold on clothes can be a source of stress in the home. Mold stains can be tough to take out from clothes so getting rid of them quickly is necessary. Because the longer mold is left on clothes, the more difficult it will be to remove. 

When mold eats organic material such as cotton clothes, it will destroy the material slowly. Continue reading and learn a few tips on how to get mold out of clothes.


How to Get Rid of Mold on Clothes

Check the following steps on how to get mold out of clothes:

1. Always check your clothes/garment care labels. 

Follow the manufacturer’s instructions, especially when it comes to washing and drying. Follow the suggested water temperature for the garment and how it should be dried, too.

2. Use a mold stain remover or scrub it off using a toothbrush.

Using the products that will be tackled below, just apply the solution to the mold stain. If the fabric is tough, such as cotton or denim, gently scrub off the mold with a clean toothbrush and the solution of your choice. Be extra cautious not to damage the fabric in the process.

3. Pre-soaking or drying in the sun is necessary.

 Depending on the type of fabric, drying in the sun is effective in removing mold stains and helps to kill mold spores in the fabric. However, sunlight has a natural bleaching effect which can fade colors and damage fabrics that are delicate.

 Pre-soaking the mold-stained fabric/garment in one of the suggested solutions below for up to an hour can be a solution for delicate garments.

4. Washing your clothes/garments in hot water can kill mold and mildew.

 Hot water is effective not only at getting rid of allergens and bacteria but killing mold spores, too. But follow the care label’s instructions for the recommended and safest temperature to wash your clothing. If your clothing or fabric can’t be washed, you can take them to the dry cleaner.

5. Give a final hang-dry of your clothing in the sun. 

For the remaining mold stains, you may repeat some of the previous steps. Drying in the sun again will help zap any remaining mold.


Choosing the Right Product 

Now that you know how to get mold out of clothes, choose the most appropriate product below for your clothes. Make sure to test it on a concealed part of the fabric or clothes first and check the safety precautions recommended on the product’s label.   

  • Soap/laundry detergent – In bar, powder, or liquid form, you can directly rub in and rinse out with water. Then dry in the sun. 
  • Bleach – Chlorine bleach is effective at killing mold, but it will also fade any colored fabric/clothes.  
  • White Vinegar – Diluted vinegar can be applied directly to the mold stain. You can also pre-soak the clothing in a pail of water mixed with a cup of vinegar. In addition, you can also add 1-2 cups of vinegar to your washing machine per cycle. This can kill any moldy smells and mildew smells not only in clothes but in your home as well.  
  • Baking soda You can use it to wash white shirts and effectively deal with mold stains. Mix 1/4 cup baking soda with water to form a paste. Apply the paste to any mold patches. Then scrub it with a toothbrush and rinse with hot water.
  • Hydrogen Peroxide – To make a solution, combine 1 part 20% hydrogen peroxide with 4 parts water. This should only be used on organic fabrics such as cotton, linen, etc. 
  • Borax – Mix a half cup of borax with hot water according to instructions. Then add the solution directly into your washing machine, and wash the clothes as normal.

 The solutions suggested above are good for eliminating mold not only in your clothes but in other areas of your home as well such as in your bathroom, basement, etc. 

Prevent Mold on Clothes 

Avoid mold in the first place. Let’s jump in for some tips. 

1. Dry your clothes quickly. 

 Take your clothes out of your washer right away and dry them in a dryer or outside. Mold is more likely to grow in moist fabric or clothing.

2. Prepare a mold prevention spray.

You can spritz your clothes with vinegar spray, baking soda solution, or any natural mold remover of your choice every 2 weeks. This can prevent musty smelling of any clothing or clothes, thus leaving them smelling fresh. 

3. Maintain moisture levels at their minimum.

Mold in clothes can occur frequently especially if the humidity level in your home is 60% or more. Thus, maintaining low levels of moisture is key when it comes to prevention. Using a dehumidifier is an efficient way of controlling the levels of humidity. 

4. Maintain good ventilation in your home and closets.

Let fresh air circulate inside your home by opening windows and turning on fans. Close windows on rainy days to keep off humidity.

5. Check HVAC filters.

Screens are usually found in any ventilation, cooling, or heating system. So it is necessary to change the filter every one to three months to prevent mold growth and allergens.

Contact Professionals for Mold Remediation Services

The smell of mold on clothes can easily spread to other unaffected clothing items and eventually spread to your property. Mold spores are airborne and can easily proliferate to different areas and materials in your home. 

How to get mold out of clothes right away is very important to prevent damage and health issues in the future. Allow Superior Restoration to take care of the job. We offer professional mold remediation services.

Contact our local office, Water Damage Murrieta. We also provide services for water damage and fire damage restoration. We are available 24/7.                                                                                                                                                                               

broken pipe

What Should I Do When A Pipe Bursts In My Home

Aside from catastrophe and natural disasters, a burst pipe is another nuisance for a homeowner like you. Knowing what to do when a pipe bursts in your home is very important. Because if not, you may have to deal with significant water damage. This article will show you how to recognize the signs of a damaged water pipe and the first things to do when a pipe bursts in your home.

Signs of a Burst Pipe

In some cases, a damaged water pipe can show some warning signs before it could cause serious damage. So, watch out for signs of a pipe burst. This includes;

Puddles that form under the sink

One of the easiest ways to know that you are dealing with a burst pipe is the puddles of water. Carefully check the wall above the pipe cover plates for any moist areas. Also, when the leak occurs, the water will begin to accumulate in the area directly below the damaged pipe. So, you can easily know if you are dealing with a busted pipe.

Fluctuating water pressure

When the water pressure goes up and down, it might be because of the busted pipe that occurred in your home. With a burst pipe, the water pressure changes. It can also affect how the water travels through water pipes.

Discolored water with the rusty smell

Discoloration of water is another good indication of a burst pipe. The water can normally appear in red/brown in color. Damaged pipes can release microscopic rust particles that can cause water to discolor.

Similar to the discoloration of water, a strange smell is also a sign of a busted pipe. So, make sure to keep an eye on these signs.

Pipes making clanging noises

A broken pipe can have an impact on the water pressure throughout your home and cause movement in the system. When the water flows, pipes begin to bang and rub at tension points and cause clanging noises behind walls. What is even worse about it, is the more friction there is the bigger the breakage would be.

Increase in your water bill

Excess amounts of water from leaks or breaks can waste around 100 gallons every year. When multiplied, this leakage can cause your water bill to suddenly spike. Also, a busted pipe can cause homeowners to use more water than normal because a burst has affected the water pressure.

What To Do When A Pipe Bursts in Your Home

When things get out of control and you have to deal with a burst pipe, follow these steps.

1. Turn off the water and drain the faucets

To locate the burst pipe, start by turning off the water supply at its main shutoff valve. It’s very important to immediately do it. The sooner you turn off the water supply to your home, the better your chances are in minimizing water damage. The main shutoff valve is usually located near your water heater, in your basement, or crawl space.

After turning off the water, open the faucets to drain the remaining water in your pipes. This will help take off some of the pressure of the pipes and prevent further leakage. Also, flush all the toilets to drain the water from them. Once the water is completely drained, the leak will stop.

2. Turn off the power supply

Always turn off your home’s electricity at the main power supply before you begin repairing your damaged pipe.

3. Call a plumber

As soon as possible, call a professional to handle the repairs.  Contact a professional plumber to diagnose the problem and do the necessary repairs. Furthermore, if there is damage to the electrical system, contact a reliable electrician.

3. Document the damage

If the damage caused by your burst pipe appears to be extensive, you should begin taking photos and even videos of the affected areas and personal belongings. These materials will be used when filing an insurance claim. Take a close-up photo of every item that has been damaged, along with the water lines. Take as many photos as you can because the more you have, the greater your chances are of getting a claim.

4. Start cleaning the water

To prevent further water damage, remove any standing water as soon as possible. When a pipe bursts, water can cause extensive damage to your home and personal belongings. But the sooner you clean the water, the less likely you are to deal with irreparable damage to your belongings. Also, when you remove the water quickly, you can prevent mold and mildew growth.

DIY Tips in Cleaning Your Flooded Home

1. Remove any excess water that you can from the affected area. These might include carpets, furniture, and electronics. Keep them in a safe, dry place.

2. You can use old towels, a mop, and a bucket to dry the affected area. You may also consider using a wet-dry vacuum to quickly and efficiently remove standing water.

3. If you have to thaw a frozen pipe, turn on the heating system to do it. But, never use a hair dryer as it can damage the pipe itself.

4. Keep windows and doors open to allow fresh air or warm air in. Set up fans and dehumidifiers for additional airflow. This also helps in drying the affected area.

5.If the broken pipes are located behind a kitchen wall, make sure to dry out all nearby cabinets and drawers after the cleanup.

Professional Water Damage Restoration Services

If your home suffers from water damage due to a burst pipe, contact a reliable water damage restoration company. A restoration company, like Superior Restoration, will take care of the water damage cleanup, as well as offer mold remediation/removal services.

Water Damage Murrieta (of Superior Restoration) has a team of experienced professionals ready to help you with complete water damage restoration and cleanup services. Contact our office today for more information.

damaged wood floor

How To Repair Your Water Damaged Wood Floor

Wood flooring is increasing its popularity to many homeowners because of the versatility of styles and affordability. However, wood’s natural fibers readily absorb water, and therefore, it is not resistant to humidity, spills, and standing liquids. Wood floor water damage is annoying and a common problem that can damage the structure of your home permanently. Thus, it is important to act fast and restore your water damaged wood floor.

Protect your wood floor from water damage and seek professional help immediately, especially if the damage is extensive.

Water Damaged Wood Floor

Water-damaged wood flooring can cause the wood to sag, making it warped and not even. You can easily notice even hardwood floor water damage due to cupping and curving of the floorboards creating raised bumpy appearance.

The longer your wood floor is left untreated, the bigger damage it will have. The damage is irreversible and may require a full restoration, even changing of the affected areas of flooring. Water and wood never mix so it is very important to act fast and deal with it as soon as possible to salvage wood, prevent mold growth, and further damage.

How to Restore your Water Damaged Wood Floor

Excess moisture can damage your hardwood floors because the material is naturally porous. So you have to begin cleaning and drying the affected areas as soon as possible.

1. Identify and stop the source of water before drying anything out.

Check for leaks or burst pipes that could be the cause of water damage to your wood floor. Then, repair the damage before cleaning up.

2. Move all furniture out of water-damaged areas

To hasten the drying process, move all the affected materials into a dry and safe place. Open doors and windows to increase air circulation if it is not too cold outside.

3. Use a large wet vacuum to extract water from the floor and do this twice.

This is to prevent buckling wood floors and warped boards from becoming loose due to moisture.

4. Gently scrub the floor to remove dirt, grease, and oily compounds that can damage the hardwood floor’s finish.

Use a non-lathery detergent that is specially formulated for cleaning and disinfecting wood floors.

5. Completely dry the area

It will take at least 24 hours to complete the drying process of hardwood floors. Put as many fans as you can so they can create multiple cross-currents of air. Moreover, run a dehumidifier as well and it should be in the center of the room. Others may dry out completely for several days. A moisture meter will check to ensure that the floors are completely dried.

6. Use a moisture meter to check the wood flooring every day.

Preventing mold after extensive water damage to your home is crucial. With a moisture meter, you can check the condition of your flooring. Look for signs of mold or mildew and scrub with a mixture of water and baking soda.


You can’t always save a laminate floor

Laminate flooring is constructed with a fiber core which makes the material absorb water and swell easily. In addition, ensure that the subflooring is totally clean and dry. Any replacement flooring will continue to absorb moisture and lead to extensive damage.


 Get Help From Our Professionals at Superior Restoration

Wooden floors can be saved from water damage once addressed immediately. If there is a small amount of water damage to your wood floor, you may be able to treat it without the help of the experts. Nevertheless, if there is excess water that leads to significant water damage, then it is time to seek help from trained professionals.

It can be very expensive to repair water-damaged wood floors so hiring a restoration specialist can save the expense of changing your floors. The experienced restoration contractor from Superior Restoration can help you with the claims process of your insurance company since it covers most water damage.

If you are not sure how to deal with your wood floor water damage, please contact the experts at Water Damage Murrieta. We offer 24/7 water damage restoration services.

mold on ceiling

7 Tips To Remove and Prevent Mold On Bathroom Ceiling

Most homeowners usually give the least importance to cleaning bathroom ceilings. It is often ignored because a typical ceiling is hard to reach for the average American. As a matter of fact, the ceiling can be a breeding ground for dirt, debris, insects, and germs. And it’s a perfect place for mold growth due to excessive moisture in the bathroom.

 Like any other part of the house, your bathroom ceiling also needs love and care to look its best. Thus, cleaning and prevention of mold on the bathroom ceiling are necessary so you and your loved ones can breathe easier when you are home.


Why does mold develop on your bathroom ceiling?

 Bathroom mold issues and moisture usually occur on the ceiling due to the following reasons: 

a.) Humidity issues happen when warm, dampened air reacts with a cool ceiling causing condensation and mold growth. 

b.) Liquid moisture issues are due to direct exposure to liquid/water such as roof leaks, plumbing failures, etc.


How To Prevent and Remove Mold on Bathroom Ceiling

The bathroom ceiling is perhaps one of the most susceptible to the growth of fungus such as mold. Due to repeated exposure to water and humidity every day, it is an ideal environment for mold to grow and thrive. Mold on your bathroom ceiling poses serious health risks to you and your family especially if not taken care of immediately. 

According to EPA, you can do cleaning alone as long as the affected area is less than 9 square feet area. Bigger than that, it is best to contact trained professionals to help you out. Otherwise, consider the following tips to remove the mold yourself and how to prevent it.

1. Always wear protective gear

The first thing you should do before doing any cleanup is putting on your mask, gloves, and goggles. Mold and cleaners can cause health problems if inhaled so make sure you protect yourself.

2. Identify the cause

Pull back the insulation and check for mold problems. Leaks cause water damage particularly roof leaks so fix them as soon as possible.

3. Prepare your preferred cleaner

You can choose from a variety of mold-killing products in the market or natural homemade mold-busting solutions. 

Bleach: Put the mixture ( 25% bleach and 75% water) in a spray bottle. Spray directly onto the surface that contains mold. Let it soak for 10-15 minutes then scrub the molded area lightly with a scrub brush.

Hydrogen Peroxide: To clean thoroughly, spray the affected area and let it sit for 10-15 minutes. Scrub the area then rinse it with water. Repeat if necessary.

Vinegar: Spray the area and let it sit for at least 15 minutes or up to one hour. Then scrub the area then rinse it with water.

Baking Soda: Add 1 teaspoon to a tablespoon of baking soda to an empty spray bottle. Fill the bottle with ¾  of hot water then shake to dissolve. Spray the area and scrub to clean the mold then, rinse with clean water.

4. Insulate the ceiling

Mold on your bathroom ceiling usually happens due to changes in temperature. The ceiling’s cool parts encourage condensation, so adding layers of insulation is helpful. This makes the surface of the ceiling warmer and will lower the risk of mold growth. 

 If you know how to insulate your bathroom, you can make it a DIY project. You can insulate the ceiling using fiberglass which is a good option.

5. Install bathroom fans

Oftentimes, mold on bathroom ceilings is caused by humidity. Especially if your bathroom doesn’t have a window, an exhaust fan or a vent fan is necessary. In addition, mounting a bathroom or ventilation fan is very helpful to reduce mold. 

6. Invest in a dehumidifier

Excessive moisture can lead to more mold spores spread in the bathroom. Purchasing your own dehumidifier is a big help because it lowers the moisture content in the bathroom. Buying a specific model for the bathroom means that it has concealed wiring to prevent the risk of fire. If you are concerned with saving and conserving electricity, you can set the dehumidifier on a timer. 

7. Paint to cover

Mold on bathroom ceilings may leave marks and stains even after removing them. You can use mold-resistant paint to cover the stains but be sure to check that all the mold is gone. Never paint over existing mold because this will just cover the mold and allow mold growth behind the paint.

 Mold Remediation By Superior Restoration

Still, upset with mold on your bathroom ceiling? If you have done everything and still think your cleaning efforts weren’t successful, depend on the professional remediation team. Our qualified technicians have the right tools for removing black mold or any type of mold on the ceiling quickly.

Please don’t hesitate to contact Water Damage Murrieta, today! We are open for 24 hours, 7 days a week to better serve you.


leaky washing machine

Washing Machine Water Damage: Causes and Prevention Tips

Washing machines are very useful and essential tools that lighten every homeowner’s load of laundry. They get modernized these days, however, they aren’t exempted from being one of the leading causes of water damage. And this can be very expensive and frustrating especially if not taken care of immediately. Having a good understanding of the causes can help you prevent washing machine water damage. In this article, you will learn the most common cause of washing machine water damage and its prevention tips.

What Causes Water Damage From a Washing Machine

Where is the water coming from? The following are common ways that your washing machine may cause water damage to your home:

  • Supply Hose Failure

The issues related to supply hose are the top cause of washing machine water damage. Supply hose failure happens when there’s a poor connection to the wall or washing machine and pinching of the hose during installation or replacement. Moreover, having an outdated supply hose is another cause that leads to brittleness.

  • Washing Machine Overloading

When you overload your washing machine, it can result in loosened valves, gaskets, and cracks which can contribute to internal leakage. Internal leaks can be a threat to your health due to water exposure that’s been in contact with the detergent, clothes’ dirt residues, and washing machine parts. Another negative effect is flooding in your laundry room which can be frustrating and can lead to water damage. Besides, too much detergent can cause flood damage due to excessive suds that can leak out of the machine.

  • Clogged Drainage Issues

The drainage system of your washing machine can lead to water damage issues caused by clogged draining pipes or improper alignment of pipes. Another reason is when your sewer backs up. Water damage caused by clogs can cause serious health problems. So it is best to bring in professionals to help you prevent water damage problems.

 Tips to Prevent Water Damage from Washing Machines

The most effective ways of preventing damage from your washing machine are the following:

  1. Install a water leak detector to get alerts in case of leaks. This device can help prevent flooding by shutting off hot and cold water supplies automatically to the washer.
  2. Check water supply hoses regularly for worn tubing, cracks, loose connections, or blisters. Change damaged hoses.
  3. Don’t overload your washing machine. Read the manufacturer’s guide and distribute clothes inside the machine evenly.
  4. Shut off water to both supply valves when the machine is idly sitting or if you will be away for several days. Change any valve that’s leaking and not properly operating.
  5. Use the right detergent for your washing machine and know how much to use to avoid excessive suds and bubbles. This can cause the washer to overflow. 
  6. Change hoses every five years to prevent water damage from washing machines. Even if they don’t seem damaged, replace them still since deterioration occurs inside the hose and may not be visible.
  7. Ensure that the drain hose is tightly inserted into the main drain line to prevent it from dislodging when the washer drains.
  8. Prevent the drain and supply hoses from becoming kinked by leaving at least four inches of space between the wall and your washer.

Seek Pros for Washing Machine Water Damage Cleanup and Restoration Services

The effects of water damage can be very devastating. In minutes, water can affect walls, floorings, and other surrounding materials. If not dealt with immediately can lead to costly repairs. Thus, quick actions are very crucial. Should your home suffers from washing machine water damage, contact professionals at Superior Restoration immediately.  We are here to help you with all of your water damage concerns and restoration needs. 

Please don’t hesitate to call our local office today, Water Damage Murrieta. We also offer round-the-clock water damage restoration services.