broken sink pipe

How To Prevent Winter Water Damage At Home

Winter is the perfect time to get snuggly warm and comfortable and enjoy the magnificence of the season. However, when the temperature is below the freezing point, there are susceptible areas of your property that are subject to potential problems. Winter can stretch your home to its limits. There’s no escape from it even from the pipes in your kitchen or bathroom to your concrete driveway. Every homeowner will have to fix it when springtime comes or further damage will havoc your house due to water damage. Learn the ways on how to prevent winter water damage in this article. 

 

How To Prevent Winter Water Damage

Winter in Murrieta will be cooler and drier than normal this year. According to WeatherSpark, the cool season lasts for 4 months, from November 23 to March 22, with an average daily high temperature below 69°F. The winter season can start to ruin your home. Homeowners should be keen on preventing future problems caused by winter. Below are some common problems and some tips on how to prevent them:

1.​ Frozen pipes

Frozen pipes that are in badly insulated areas of your home will usually result in leaks and can cost a lot to fix. Many homes suffer grave damage​ due to frozen pipes that burst and cause damage to floors, walls, and even furniture. To prevent frozen pipes, allow warmer air to circulate by opening kitchen and bathroom cabinet doors. Also, allowing cold water to drip from the faucets helps prevent the pipes from freezing.

The thermostat should be set to the same temperature the whole day. The heating costs may increase, but pipes will be less likely to freeze and burst.

2.​ Ice dams and leaks on the roof

Small openings between roofing materials can create bigger problems in the winter especially in extreme temperatures that can cause expansion and contraction. To prevent an ice dam from forming, make sure that any gaps in the roof or attic that permit hot air to escape from your home are sealed and tightly closed. When the weather is warm, watch out for water stains, missing caulk, loose shingles, or nails that extend into an attic space. Also, cleaning gutters and breaking up piles of ice that start to form on your roof will help prevent ice dams.

3.​ Mold Appearance

Possible mold growth can be seen near insulated vents in rooms, bathrooms, laundry rooms, or exterior walls, causing extensive damage to drywall and ceilings. Using a dehumidifier in problem areas of your house, as well as removing carpet from areas that are moist or humid can prevent mold from infesting your home. Also, checking for early signs of mold growth in your home can save you a lot of headaches.

4. Falling tree branches

Winter storms, strong winds, and ice storms can make the branches of trees, like the white pine, break and fall causing damage to your home. Experts suggest cutting and removing overhanging branches that could damage your home once a tree falls. Another solution would be bracing tree trunks with cables fasten to stakes around the tree.

5. Issues on chimneys

Creosote starts to form inside your chimney when the temperature is low. According to The Chimney Safety Institute of America, creosote is formed when smoke, water vapor, gases, wood particles that are unburned, hydrocarbon, tar fog, and different minerals exit and flow up into the cooler chimney. This substance is exceedingly flammable and if no proper chimney maintenance, it could result in a chimney fire. Check the outer part of your chimney for any warping, cracks, or discoloration from smoke before winter arrives. Your chimney should be inspected and repaired on a regular basis to prevent the fire from wrecking your home.

Other Safety Tips

  • Consider purchasing sewage back-up coverage due to heavy rains and melting snow that can overload the stormwater system. This can cause sewage or water to back up into the home.
  • Annually check the water supply lines for leaks. Examples of appliances that can leak are washing machines, refrigerators, water heaters, etc. 
  • Detach or disconnect outdoor hoses when not in use. This will create an obstruction that can cause backflow and will prevent water from freezing.
  • When a water problem occurs, place water leak detectors near water-bearing fixtures, beneath or at the back of the pipes, and on sump pumps.

 

Professional Water Damage By Superior Restoration

Following the tips above can help you protect your property and prevent water damage in winter.

Contact a professional water damage restoration company to ease your worries this winter! Our staff, with superb expertise, will help you quickly return your home to its pre-damaged condition.  Please don’t hesitate to call Water Damage Murrieta, we respond immediately and open for 24 hours.  

frozen pipes

How To Thaw Frozen Pipes and Prevent Water Damage

In winter, when the temperature drops, one major issue that can occur is a frozen pipe burst. Water that escapes from pipes due to sudden bursts can cause a lot of damage and interruption to the life of homeowners. A simple tiny pipe crack can bring out about 200 gallons of water, enough to ruin a home and cause severe water damage. Yet, preventing frozen pipes to burst and knowing how to thaw water supply pipes in the first place, can keep you and your home from all the interruptions and repair costs water damage can cause.

Why Frozen Pipes Burst

During this cold season, when the temperature in a home drops to 20 degrees F, it is very common that water supply pipes to burst. When water freezes, it expands and this expansion adds pressure on the plumbing pipes. The expansion of water and pressure build-up can cause pipes to develop a tiny leak at a joint or a crack along the pipelines, releasing an ample amount of water inside a home.

No doubt that repairing a burst pipe can cost a lot. But, what is even more worrisome is the water damage from uncontrolled water leaks. This damage can cost thousands of dollars for repair.

Which Water Lines Are More Likely to Freeze

You, as a homeowner, must know how to locate the frozen pipes. Remember that some water pipes are susceptible to freezing in winter. In general, most homes in the northern climate install water pipes inside the building insulation. They are protected from subfreezing weather. However, the tiny holes that allow the air to flow inside the home and get in contact with the pipes can cause them to freeze and burst.

Moreover, exposed pipes located along the exterior walls of a home as well as pipes running through the attic, basement, crawl space, and unheated areas of the home are vulnerable to freezing. Also, the main water supply line can be at risk of freezing and bursting. Also, keep in mind that hot water pipes can freeze and eventually burst.

Insulation is the best solution in preventing pipes to freeze. Insulate pipes that run along the exterior wall of your home and pipes that are located in unheated areas. Moreover, open kitchen cabinet doors to allow warm air to circulate the pipes.

How To Thaw Frozen Pipes

When doing the thawing process, open the faucet first. The water flowing through the pipes will help melt the ice formation in them. However, the real damage begins when the frozen water begins to thaw. This frozen water can act as a plug that prevents water to spill out through the cracks of the pipes. So when that water thaws, water bursts out from the pipe. It is best to be ready with a mop, a pail, or towels. 

To thaw frozen pipes, you can use a hairdryer, a heat lamp, or a space heater. Place an electrical heating tape around the pipe first before applying heat to it. You can also wrap the frozen area with a thermostatically controlled heat pad, which costs from $50-$200, depending on its length. Just keep in mind to never use a propane torch or any open flame devices to thaw a frozen pipe as it can lead to fire risk.

What To Do When A Frozen Pipe Burst

When a pipe bursts, it can lead to significant water damage. That is why immediate action has to take place to prevent water from damaging your property. Here are the steps you can follow to deal with frozen pipe bursts. 

  • Shut Off the Main Water Supply Line

Everyone should know where the main water supply line is located. The faster you can turn off the valve, the lesser the damage could be. Moreover, if water starts to seep through walls or ceiling, turn off the main valve of your electricity to prevent any secondary damage and electrical shock. 

  • Call a Plumber 

Not all companies offer 24/7 emergency services. So, keeping a list of professional plumbers can fix any pipe issues immediately. The pipe repair cost depends on the severity of the damage and the location of the pipe. 

  • Contact Your Insurance Company 

If a pipe burst causes water damage to your home, contact your homeowner’s insurance company. In most cases, burst pipes are included and covered in a standard homeowner’s insurance policy. Be sure to talk to your insurance provider about the damage and the necessary repairs, so they can let you know the details of your coverage. 

  • Remove Standing water and Dry The Area 

You can use mops, towels, and buckets to remove standing water. If needed, you can use a wet/dry vacuum to seep the water faster. To prevent mold and mildew growth and moisture-related problems, set fans and dehumidifiers. Let them sit until the area is totally dry.

Water Damage Restoration Professionals

It is indeed not easy to deal with a frozen burst pipe because of its aftermath. Not only you will be faced with serious water damage, but if the problem is not addressed immediately, you will be dealing with mold growth.

A professional water damage restoration company, like Water Damage Murrieta, will help you deal with all these problems. This company is certified to perform the standard procedures of restoration. They have technicians that are fully trained and skilled in dealing with all kinds of water damage and other related issues. They have enough experience to bring back the normal life of your home.

If you need our professionals to work with your water damage problems, please call us today

Water Damage Cleanup: How Professionals Do It

When a flood or burst pipe disaster damages your home, you need to act quickly and hire certified professionals for the cleanup. Even when soaked materials are removed, excess moisture, accumulated in your home, can lead to lingering problems. The damage can become worse if water has come in with a contaminated source or flood.

Only professional water damage restoration crew knows how to remove excess moisture and mitigate the risks. This article highlights the professionals’ way of handling water damage cleanup to give you an idea about how complex the task is and why it should always be left to the professionals.

Assessing the Extent of Damage

The professionals from water damage service will first discover the source of the moisture and assess the extent of the damage. After that, they will isolate the area and remove all the standing water. If several inches of water are present like a flooded basement from a burst pipe, commercial pumping systems will be used to dry the space as soon as possible.

Disposing the Materials

After removing the standing water, the technicians will examine the area and dispose away the materials that have suffered damaged. Typically, contaminated and wet materials are eliminated. Baseboards, carpets, drywall portions, plywood, particle board and casing usually are not able to survive prolonged exposure to moisture, especially when they have been soaked for over 24 hours.

Wick off the Moisture

After the damaged materials have been removed, the only materials that are left are those which can be dried and saved. Therefore, the restoration professionals then quickly try to wick off as much moisture as possible.

Usually this process involves the use of high volume dehumidifiers and commercial air movers. This equipment can restore the building to its normal moisture level within a few days.

Air movers and dehumidifiers normally work well enough, but in some particular cases, restoration crew uses special equipment such as heat injectors to dry out the places that are hard to reach. A moisture meter with probes that can be inserted into materials is used by professional technicians to monitor the moisture content level.

Once the building has been returned to its original moisture content level, the restoration crew will take apart the cleanup area and properly put all the furniture the way it was before the restoration.

Address Microbial Growth

Addressing microbial growth is an important part of the water damage cleanup and the technicians who perform restoration will also destroy molds as well as other microorganisms. Special agents are used for this purpose to clean up the areas which may harbor the pathogens.

Once a water damage restoration company is finished with the cleanup, your home will be ready to live in again. Your family won’t have to worry about any danger from harmful microorganisms.

Now that you know how professional restoration services handle water damage cleanup, you will always hire a professional water damage restoration company that can guarantee this level of service. To get in touch with the best in the industry, contact Superior Restoration as we are equipped with certified technicians who are experienced with water damage restoration and cleanup.

 

 

 

 

 

Rain proofing – a necessity rather than a luxury

It’s a fact that in California when it starts to rain people appear to go insane. Drivers forget how to drive and start acting like there are on a go-kart track. People wear the most wildly inappropriate clothing for the weather and generally act like chickens with their head cut off. One area of rain management that Californians are particularly bad at is rain the proofing their homes. It doesn’t always rain in California but when it does it’s usually quite dramatic and for homes that are not prepared it can be quite devastating in the water damage Department.

Most homes in California are designed to deal with extremes of heat rather than extremes of water. One area of concern is the caulking around windows and doors. The heat during the summer months can cause the gawking to crack and break off and during the rainy season this will allow rain directly into your home causing untold water damage. One would prevent this is of course to replace the caulking in the fall.

Another area for concern is the ceiling of your home and the roof above it. If your roof is not properly maintained land water will make its way into your home and the damage can be lasting. Though it’s difficult to identify a problem area on the roof before it rains if you see cracked or broken tiles or loose or shifted shingles those should be replaced immediately. A small amount of prevention can save you a great deal of money in the long run. If your home has become flooded you should contact a quality water damage restoration company to effect repairs.

If you are you looking to purchase a home, buy an investment property, or remodel your current property a rainy day is the best time to see any leaks or drainage issues that need to be addressed. You can check out the roof, gutters, and grade of the property. Make sure you inspect the attic especially around chimneys and vents, as these errors are particularly susceptible to water damage.

You can watch to see if the gutters are over flowing and see if the splash blacks are positioned correctly. If there are issues with water it is good to know before you purchase, rent, or remodel and the faster the problem is identified the faster it can be fixed. Storm damage, standing water, and moisture can cause mold to grow which could eventually become a health risk as well as cause further damage to sheetrock and carpet. Prolonged exposure to mold as well known to cause long lasting health issues.

If you suspect you have roof damage or defects in your home caused by water that may lead to mold the work can be started immediately after the inspection making it easy to meet a closing date. Take the opportunity to watch out on the next rainy day as itsan ideal time to inspect your home as to be accurate of the cause of leaks and trapped water. Storms, wind, and fallen limbs can cause damage that is not recognized immediately.  If the damage is beyond your capabilities to repair seek out a quality water damage restoration company to do the work for you.